Activating Internal Speaker ON/OFF
This feature allows you to select whether or not the speaker output is sounded when the
“RFP Alert” is triggered. Initially from the factory the speaker output is activated.
Toggling between
5
,
∞
buttons allows you to deactivate or activate the “Speaker Output”.
If you switch the speaker output OFF, you cannot change the “Test Mode”.
Speaker Volume Output Adjustment
If the “Speaker Output” has been selected then it is possible to adjust the volume of the
speaker output for when the Alert is triggered. To adjust the volume you must engage the
“Test Mode”.
Note:
• If the “Speaker Output” is turned OFF, then this menu will not appear.
6. Press the FUNCTION button
to move to the next selection.
5. Cancel the “Test Mode” with
the
2
button.
4. After setting volume, switch
the “Test Mode” OFF with the
∞
button.
3. Decrease or increase the vol-
ume with the +/– button.
Display shows “10” – “40”.
2. Press the
5
button to switch
the “Test Mode” ON.
In this mode the speakers will sound.
1. Select the “Test Mode” with
the
3
button.
70
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
