Pioneer DEH-P900HDD, Service Manual

Page: 97 / 149

97
DEH-P90HDD,P900HDD
(4) Operation status display during setup
Status No. Description Protection operation
00 CD + 5 V ON is being processed. None
01 SERVO LSI is being initialized (1/3). None
02 CRAM of servo LSI is being initialized. None
03 SERVO LSI is being initialized (2/3). None
04 Offset is being adjusted (1/3). None
05 Offset is being adjusted (2/3). None
06 Offset is being adjusted (3/3). None
07 FZD is being adjusted. None
08 Servo LSI is being initialized (3/3). None
10,11 Carriage Home processing start. None
12 Carriage is moving toward the inside Timeout for ten seconds, defective Home SW.
circumference.
13 Carriage is moving toward the outside Timeout for ten seconds, defective Home SW.
circumference.
14 Carriage outer kicking. None
15 Carriage is being sent to the outside None
circumference. (for one second)
20 Servo Close processing start. None
21 Being processed before Focus Search None
start.
22 Spindle rotation, Focus Search start. None
23 Focus Close (FOON = Low) wait. Focus Search timeout.
24 Waiting after Focus Close. None
25 Being processed before Focus Search None
start, at setup protection.
26 Being processed before Focus Search None
start, at fast recovery.
27 RF detection. (RFOK = Hi confirmation) Focus slips off, no RF is output.
28 Spindle OLV rough servocontrol. Focus slips off.
29 Setting before T balance adjustment Focus slips off.
processing start.
30 T balance adjustment (1/2). Focus slips off.
31 T balance adjustment (2/2). Focus slips off.
32 Spindle CLV stationary servocontrol. Focus slips off.
33 Tracking Close processing (1/2). Focus slips off.
34 Tracking Close processing (2/2). Focus slips off.
35 Setting before Focus/Tracking AGC Focus slips off.
start.
36 Focus AGC start processing. Focus slips off.
37 Focus AGC processing (1/2). Focus slips off.
38 Focus AGC processing (2/2). Focus slips off.
39 Setting before Tracking AGC start. Focus slips off.