71
Initial Settings
S
etting the DAB priority function
When a hide-away DAB tuner (e.g., GEX-
P700DAB) is connected, you can set the
product in this mode so that a traffic information
interruption from the hide-away DAB tuner
takes precedence over this product’s RDS traf-
fic announcement (TA) function.
1. With the source turned off, press and
hold 1.
2. Press NEXT and then press DAB P. to
select the DAB priority setting mode.
3. Press DAB P. to turn the DAB priority set-
ting on.
“ON” appears in the display.
• Press DAB P. again to turn the DAB priori-
ty setting off.
Note:
• You can select to the DAB priority setting mode
only when a separately sold hide-away DAB tuner
(e.g., GEX-P700DAB) is connected.
With DAB priority ON
When the selected service component supports
road traffic flashes and transport flashes, DAB
reception is not interrupted by this product’s
RDS traffic announcement (TA).
With DAB priority OFF
Interruption is by the first received news flash,
either this product’s RDS or the hide-away DAB
traffic information broadcast.
S
witching the auto PI seek
During the preset station PI seek operation, you
can switch the auto PI seek function on or off.
(Refer to “Using the PI seek function” on page
18.)
1. With the source turned off, press and
hold 1.
2. Press NEXT and then press A.PI to select
the auto PI seek mode.
3. Press A.PI to turn the auto PI seek on.
“ON” appears in the display.
• Press A.PI again to turn the auto PI seek
off.