23
Built-in CD Player
D
isplay and indicators
FORM 1
FORM 2
q
Source name
w
Track number
e
Disc title
r
Play time
t
Track title
B
asic operation
The built-in CD player plays one standard 12
cm or 8 cm (single) CD at a time. Do not use an
adapter when playing an 8 cm CD.
1. Press OPEN to open the front panel.
2. Insert a CD into the CD loading slot.
3. Close the front panel.
4. Press VOLUME to extend the VOLUME
outward.
• When you press VOLUME, it extends out-
ward so that it becomes easier to turn. To
retract VOLUME, press it again.
5. Turn VOLUME to adjust the volume.
6. Press
2
2
or
3
3
to select a track.
Pressing
3
skips to the start of the next
track.
Pressing
2
once skips to the start of the cur-
rent track. Pressing again will skip to the
previous track.
• If you press and hold
2
or
3
, you can per-
form fast forward or reverse.
7. Press OPEN and then press CD EJECT to
eject the CD.
• Be sure to close the front panel after
removing the CD.
WARNING:
• Do not use with the front panel left open. If the
front panel is left open, it may result in injury
in the event of an accident.
Note:
• You can select CD as the source by pressing
SOURCE when a disc is loaded in this product.
• When the front panel is open, multi-function but-
tons are not available.
• Do not insert anything other than a CD into the CD
loading slot.
• A CD left partially inserted after ejection may incur
damage or fall out.
• If a CD cannot be inserted fully or playback fails,
make sure the recorded side is down. Press the CD
EJECT and check the disc for damage before rein-
serting it.
• If the built-in CD player cannot operate properly, an
error message (such as “ERROR-12”) appears on
the display. Refer to “Understanding built-in CD
player error messages” on page 78.
CD EJECT button
CD loading slot
e
t
q
w
r
e
r
q
w