Black plate (7,1)
<CRD3840-A/N>7
!
Keep the front panel out of direct sunlight and
high temperatures.
!
A few seconds after turning the ignition
switch to on or off, the front panel automati-
cally moves. When this happens, your fingers
may become jammed in the panel, so keep
your hands away from it.
!
When removing the front panel, be sure to
hold the corrugated release button on the rear
of the front panel while pulling.
Removing the front panel
1 Press EJECT to open the front panel.
2 Slide and remove the front panel to-
ward you.
Take care not to grip it too tightly or to drop
the front panel and protect it from contact
with water or other fluids to prevent perma-
nent damage.
Release button
3 Put the front panel into the protective
case provided for safe keeping.
Attaching the front panel
1 Make sure the inner cover is closed.
2 Replace the front panel by clipping it
into place.
About the demo mode
This unit features two demonstration modes.
One is the reverse mode, the other is the fea-
ture demo mode.
!
You cannot cancel a demo mode when the
front panel is open.
!
When the front panel is open,
BAND
,
ENTERTAINMENT
,
EQ
and
EQ-EX
are not
available.
Important
The red lead (ACC) of this unit should be con-
nected to a terminal coupled with ignition switch
on/off operations. If this is not done, the vehicle
battery may be drained.
Reverse mode
If you do not perform an operation within
about 30 seconds, screen indications start to
reverse, and then continue reversing every 10
seconds. Pressing
BAND
when power to this
unit is turned off while the ignition switch is
set to ACC or ONcancels the reverse mode.
Press
BAND
again to start the reverse mode.
Before You Start
En
7
English
Section
01
