Pioneer DEH-P800BT, Operation Manual

Page: 44 / 148

Audio Adjustments
Introduction of audio adjustments
1 1 1
1
Audio display
Shows the audio adjustment status.
1 Press MULTI-CONTROL to display the
main menu.
FUNCTION
, AUDIO and ENTERTAINMENT
appear on the display.
2 Use MULTI-CONTROL to select AUDIO.
Turn to change the menu option. Press to se-
lect.
The audio function name appears on the dis-
play.
3 Turn MULTI-CONTROL to select the
audio function.
Turn
MULTI-CONTROL
to switch between the
audio functions in the following order.
Fader
(balance adjustment)
—
Powerful
(gra-
phic equalizer adjustment)
—
50Hz (7-band
graphic equalizer adjustment)
—
LOUD (loud-
ness)
—
Sub W.1 (subwoofer on/off setting)
—
Sub W.2 (subwoofer setting)
—
Bass (bass
boost)
—
HPF
(high pass filter)
—
SLA
(source
level adjustment)
—
ASL
(automatic sound le-
velizer)
#
You can also select the audio function by
pressing AUDIO on the remote control.
#
You can select the
Sub W.2
only when sub-
woofer output is turned on in
Sub W.1
.
#
When selecting FM as the source, you cannot
switch to SLA .
#
To return to the display of each source, press
BAND .
#
If you do not operate functions except for
50Hz
within about 30 seconds, the display is
automatically returned to the ordinary display.
Using balance adjustment
You can change the fader/balance setting so
that it can provide the ideal listening environ-
ment in all occupied seats.
1 Use MULTI-CONTROL to select Fader.
#
If the balance setting has been previously ad-
justed,
Balance
will be displayed.
2 Push MULTI-CONTROL up or down to
adjust front/rear speaker balance.
Each time MULTI-CONTROL is pushed up or
down, the front/rear speaker balance moves
towards the front or rear.
F 15 to R 15 is displayed as the front/rear
speaker balance moves from front to rear.
#
F/R 0 is the proper setting when only two
speakers are used.
#
When the rear output setting is Rear SP :S/W ,
you cannot adjust front/rear speaker balance.
Refer to
Setting the rear output and subwoofer
controller on page 51.
3 Push MULTI-CONTROL left or right to
adjust left/right speaker balance.
Each time MULTI-CONTROL is pushed left or
right, the left/right speaker balance moves to-
wards the left or right.
L 15 to R 15 is displayed as the left/right
speaker balance moves from left to right.
Using the equalizer
The equalizer lets you adjust the equalization
to match the car
’
s interior acoustic character-
istics as desired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves.
Display Equalizer curve
Powerful Powerful
Natural Natural
Vocal Vocal
Operating this unit
En
44
Section
02