Pioneer DEH-P800BT, Operation Manual

Page: 42 / 148

2 Use MULTI-CONTROL to select
Auto answer.
3 Press MULTI-CONTROL to turn auto-
matic answering on.
#
To turn automatic answering function off,
press
MULTI-CONTROL
again.
Echo canceling and noise reduction
1 Display the function menu.
Refer to Introduction to advanced operations
on page 40.
2 Use MULTI-CONTROL to select
Echo cancel.
3 Push MULTI-CONTROL left or right to
select the desired setting.
OFF
(off)
—
LOW
—
MID
—
HIGH
#
This function can be performed even while
talking on the phone. In this case, press
MULTI-CONTROL
to switch to
Echo cancel
.
Switching the ring tone
1 Display the function menu.
Refer to Introduction to advanced operations
on page 40.
2 Use MULTI-CONTROL to select
Ring tone in the function menu.
3 Push MULTI-CONTROL left or right to
select the desired setting.
OFF
(off)
—
BEEP1
—
BEEP2
—
BEEP3
Making a call by entering
phone number
Important
Be sure to park your vehicle and apply the park-
ing brake when performing this operation.
1 Display the function menu.
Refer to Introduction to advanced operations
on page 40.
2 Use MULTI-CONTROL to select
Number dial.
#
You can also press DIRECT on the remote con-
trol to enter in this menu from the standby dis-
play.
3 Push MULTI-CONTROL up or down to
select a number.
#
You can also input numbers by pressing
0
to
9
on the remote control.
4 Push MULTI-CONTROL left or right to
move the cursor to the previous or next po-
sition.
#
Up to 24 digits can be entered.
5 When you finish entering the number,
press MULTI-CONTROL.
Call confirmation appears.
6 Press MULTI-CONTROL again to make a
call.
7 To end the call, press .
Clearing memory
1 Display the function menu.
Refer to Introduction to advanced operations
on page 40.
2 Use MULTI-CONTROL to select
Clear memory.
3 Push MULTI-CONTROL up or down to
select an item.
Phone book
(phone book)
—
All clear (delete
all memory)
—
Dial preset (preset phone num-
bers)
—
Recent calls
(call history)
#
If you want to clear the entire Phone Book,
call history list and preset phone number, select
All clear .
4 Push MULTI-CONTROL right to deter-
mine the item that you want to delete
from this unit.
Clear memory YES
is displayed. Clearing
memory is now on standby.
Operating this unit
En
42
Section
02