Adjusting initial settings
1
Press SRC and hold until the unit turns
off.
2
Press MULTI-CONTROL and hold until
the initial setting menu appears in the dis-
play.
3
Turn MULTI-CONTROL to select one of
the initial settings.
CLNDR
(calendar)
—
CLOCK
(clock)
—
FM STEP
(FM tuning step)
—
AM STEP
(AM tuning step)
—
WARNING
(warning tone)
—
AUX1
(auxiliary
input 1)
—
AUX2
(auxiliary input 2)
—
REAR SP
(rear output and subwoofer controller)
—
TEL
(telephone muting/attenuation)
—
EVERSCROLL
(ever scroll)
—
BT AUDIO
(Blue-
tooth audio)
—
PIN CODE INPUT
(pin code
input)
—
EDIT DEVICE NAME
(device name
edit)
—
BT INFO
(Bluetooth version informa-
tion)
—
BT RESET :MEMORY
(Bluetooth reset)
—
SOFTWARE UPDATE
(software update)
#
You can also select the function by pressing
FUNCTION
on the remote control.
#
To cancel initial settings, press
BAND/ESC
.
Setting the date
The calender display adjusted in this mode ap-
pears when the telephone source is selected
or sources and the feature demo are off.
1
Display the initial setting menu.
Refer to
Adjusting initial settings
on this page.
2
Use MULTI-CONTROL to select CLNDR.
CLNDR
appears in the display.
3
Push MULTI-CONTROL left or right to
select the segment of the calendar display
you wish to set.
Day
—
Month
—
Year
As you select segments of the calendar dis-
play the segment selected will blink.
4
Push MULTI-CONTROL up or down to
set the date.
Pushing
MULTI-CONTROL
up will increase
the selected day, month or year. Pushing
MULTI-CONTROL
down will decrease the se-
lected day, month or year.
Setting the clock
Use these instructions to set the clock.
1
Display the initial setting menu.
Refer to
Adjusting initial settings
on this page.
2
Use MULTI-CONTROL to select CLOCK.
3
Push MULTI-CONTROL left or right to
select the segment of the clock display you
wish to set.
Hour
—
Minute
As you select segments of the clock display,
the selected segment blinks.
4
Push MULTI-CONTROL up or down to
put a clock right.
Note
You can match the clock to a time signal by
pressing
MULTI-CONTROL
.
!
If
00
to
29
, the minutes are rounded down.
(e.g.,
10:18
becomes
10:00
.)
!
If
30
to
59
, the minutes are rounded up. (e.g.,
10:36
becomes
11:00
.)
Setting the FM tuning step
The FM tuning step employed by seek tuning
can be switched between 100 kHz, the preset
step, and 50 kHz.
!
If seek tuning is performed in 50 kHz steps,
stations may be tuned in imprecisely. Tune
in the stations with manual tuning or use
seek tuning again.
1
Display the initial setting menu.
Refer to
Adjusting initial settings
on this page.
Initial Settings
En
43
Section
04
Initial
Settings
