Displaying BD (Bluetooth
Device) address
1
Use MULTI-CONTROL to select
DEVICE INFO in the function menu.
The device name (
PIONEER BT UNIT
) of this
unit appears in the display.
2
Press MULTI-CONTROL to display the
setting mode.
3
Use MULTI-CONTROL to select the de-
sired setting.
Turn to change the setting.
DEVICE NAME
(Device name)
—
BD ADDRESS
(BD (Bluetooth Device) address)
Bluetooth Telephone
Basic Operations
If you use a Bluetooth adapter (e.g. CD-
BTB100), you can connect a cellular phone fea-
turing Bluetooth wireless technology to this
unit for hands-free, wireless calls, even while
driving.
Important
!
Since this unit is on standby to connect with
your cellular phone via Bluetooth wireless
technology, using this unit without running
the engine can result in battery drainage.
!
Advanced operations that require your atten-
tion such as dialing numbers on the monitor,
using phone book, etc., are prohibited while
you are driving. When you need to use these
advanced operations, stop your vehicle in a
safe place.
Notes
!
Equalizer curve for the phone source is fixed.
!
When selecting the phone source, you can
only operate
FADER/BALANCE
(balance ad-
justment) in the audio menu.
Setting up for hands-free phoning
Before you can use the hands-free phoning
function you must set up the unit for use with
your cellular phone. This entails establishing a
Bluetooth wireless connection between this
unit and your phone, registering your phone
with this unit, and adjusting the volume level.
1
Connection
For detailed instructions on connecting your
phone to this unit via Bluetooth wireless tech-
nology, refer to
Connecting a cellular phone
on
page 37.
#
Your phone should now be temporarily con-
nected. However, to make best use of the technol-
ogy, we recommend you register the phone to
this unit.
2
Registration
To register your temporarily connected phone,
refer to
Registering a connected cellular phone
on page 38.
3
Volume adjustment
Adjust the earpiece volume on your cellular
phone for comfort. When adjusted, the volume
level is memorized in this unit as the default
setting.
#
Caller
’
s voice volume and ring volume may
vary depending on the type of cellular phone.
#
If the difference between the ring volume and
caller
’
s voice volume is big, overall volume level
may become unstable.
#
Before disconnecting the cellular phone from
this unit, make sure to adjust the volume to a
proper level. If the volume is muted (zero level) on
your cellular phone, the volume level of your cel-
lular phone remains muted even after the cellular
phone is disconnected.
Available accessories
En
35
English
Section
06
