Recalling equalizer curves
There are six stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves.
Display
Equalizer curve
POWERFUL
Powerful
NATURAL
Natural
VOCAL
Vocal
CUSTOM
Custom
FLAT
Flat
SUPER BASS
Super bass
!
CUSTOM
is an adjusted equalizer curve
that you create. If you make adjustments to
an equalizer curve, the equalizer curve set-
ting is memorized in
CUSTOM
.
!
When
FLAT
is selected, no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
FLAT
and a set equalizer curve.
1
Use MULTI-CONTROL to select
PRESET EQUALIZER.
2
Press MULTI-CONTROL to display the
setting mode.
3
Turn MULTI-CONTROL to select the
equalizer.
#
You can also perform the same operations by
pushing
MULTI-CONTROL
up or down.
Adjusting equalizer curves
The factory supplied equalizer curves, with the
exception of
FLAT
, can be adjusted to a fine
degree (nuance control).
1
Use MULTI-CONTROL to select
EQ SETTING 1.
2
Press MULTI-CONTROL to display the
setting mode.
3
Press MULTI-CONTROL to select the seg-
ment you wish to set.
Press
MULTI-CONTROL
repeatedly to switch
the segment in the following order:
L
(low)
—
M
(mid)
—
H
(high)
4
Turn MULTI-CONTROL to adjust the
level of the equalization band.
+6
to
–
6
is displayed as the level is increased
or decreased.
#
You can also perform the same operations by
pushing
MULTI-CONTROL
up or down.
#
You can then select another band and adjust
the level.
Fine-adjusting equalizer curve
You can adjust the center frequency and the Q
factor (curve characteristics) of each currently
selected curve band (
LOW
/
MID
/
HI
).
Level (dB)
Center frequency
Q=2N
Q=2W
Frequency (Hz)
1
Use MULTI-CONTROL to select
EQ SETTING 2.
2
Press MULTI-CONTROL to display the
setting mode.
3
Press MULTI-CONTROL to select the seg-
ment you wish to set.
Press
MULTI-CONTROL
repeatedly to switch
the segment in the following order:
Band
—
Frequency
—
Q factor
4
Turn MULTI-CONTROL to adjust the se-
lected segement.
Band
LOW
(low)
—
MID
(mid)
—
HI
(high)
Frequency
Low:
40HZ
—
80HZ
—
100HZ
—
160HZ
Mid:
200HZ
—
500HZ
—
1KHZ
—
2KHZ
High:
3KHZ
—
8KHZ
—
10KHZ
—
12KHZ
Audio Adjustments
En
23
English
Section
03