Pioneer DEH-P4100SD, Operation Manual

Page: 26 / 127

Recalling equalizer curves
There are six stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves.
Display Equalizer curve
POWERFUL
Powerful
NATURAL Natural
VOCAL Vocal
CUSTOM Custom
FLAT Flat
SUPER BASS
Super bass
!
CUSTOM is an adjusted equalizer curve
that you create.
!
When FLAT is selected, no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
FLAT and a set equalizer curve.
1 Use MULTI-CONTROL to select
PRESET EQUALIZER in the audio function
menu.
2 Press MULTI-CONTROL to display the
setting mode.
3 Turn MULTI-CONTROL to select the
equalizer.
#
You can also perform the same operations by
pushing
MULTI-CONTROL
up or down.
4 Press MULTI-CONTROL to determine
the selection.
#
Even if the menu has been cancelled before
determination, operation is settled.
Adjusting equalizer curves
The factory supplied equalizer curves can be
adjusted to a fine degree (nuance control).
1 Use MULTI-CONTROL to select
EQ SETTING 1 in the audio function menu.
2 Press MULTI-CONTROL to display the
setting mode.
3 Press MULTI-CONTROL to select the seg-
ment you wish to set.
Press MULTI-CONTROL repeatedly to switch
the segment in the following order:
L (low)
—
M (mid)
—
H (high)
4 Turn MULTI-CONTROL to adjust the
level of the equalization band.
+6
to
–
6 is displayed as the level is increased
or decreased.
#
You can also perform the same operations by
pushing
MULTI-CONTROL
up or down.
#
You can then select another band and adjust
the level.
Fine-adjusting equalizer curve
You can adjust the center frequency and the Q
factor (curve characteristics) of each currently
selected curve band (
LOW
/
MID
/
HI
).
Level (dB)
Center frequency
Q=2N
Q=2W
Frequency (Hz)
1 Use MULTI-CONTROL to select
EQ SETTING 2.
2 Press MULTI-CONTROL to display the
setting mode.
3 Press MULTI-CONTROL to select the seg-
ment you wish to set.
Press MULTI-CONTROL repeatedly to switch
the segment in the following order:
Band
—
Frequency
—
Q factor
4 Turn MULTI-CONTROL to adjust the se-
lected segement.
Band
LOW (low)
—
MID (mid)
—
HI (high)
Audio Adjustments
En
26
Section
03