Introduction of audio
adjustments
1
Press MULTI-CONTROL to display the
main menu.
2
Use MULTI-CONTROL to select AUDIO.
Turn to change the menu option. Press to se-
lect.
3
Turn MULTI-CONTROL to select the
audio function.
Turn
MULTI-CONTROL
to switch between the
audio functions in the following order.
FADER/BALANCE
(balance adjustment)
—
PRESET EQUALIZER
(equalizer recall)
—
EQ SETTING 1
(equalizer adjustment)
—
EQ SETTING 2
(equalizer fine adjustment)
—
LOUDNESS
(loudness)
—
SW SETTING 1
(sub-
woofer on/off setting)
—
SW SETTING 2
(sub-
woofer setting)
—
HIGH PASS FILTER
(high
pass filter)
—
BASS BOOST
(bass boost)
—
SRC LV ADJUST
(source level adjustment)
4
Press MULTI-CONTROL to display the
setting mode of each function.
#
Push
MULTI-CONTROL
left to display the
function selection menu.
#
Push and hold
MULTI-CONTROL
left to dis-
play the main menu.
5
Adjust the each function.
Notes
!
To return to the previous display, press
DISP/BACK/SCRL
.
!
To return to the main menu, press and hold
DISP/BACK/SCRL
.
!
To return to the ordinary display, press
BAND/ESC
.
!
When the subwoofer controller setting is
PREOUT:REAR
, you cannot switch to
SW SETTING 1
(subwoofer on/off setting).
(Refer to page 30.)
!
You can select the
SW SETTING 2
only when
subwoofer output is turned on in
SW SETTING 1
.
!
When selecting FM as the source, you cannot
switch to
SRC LV ADJUST
.
!
If you do not operate functions within about
30 seconds, the display automatically returns
to the ordinary display.
Using balance adjustment
You can change the fader/balance setting so
that it can provide the ideal listening environ-
ment in all occupied seats.
1
Use MULTI-CONTROL to select
FADER/BALANCE in the audio function
menu.
2
Press MULTI-CONTROL to display the
setting mode.
3
Press MULTI-CONTROL to select the seg-
ment you wish to set.
Press
MULTI-CONTROL
repeatedly to switch
between fader and balance.
4
Turn MULTI-CONTROL to adjust speaker
balance.
Front/rear speaker balance can be adjusted
between
FAD F15
and
FAD R15
.
Left/right speaker balance can be adjusted be-
tween
BAL L15
and
BAL R15
.
#
You can also perform the same operations by
pushing
MULTI-CONTROL
up or down.
#
FAD 0
is the proper setting when only two
speakers are used.
#
When the rear output setting is
REAR SP :SUB W
, adjusting the front/rear speak-
er balance is not effective. Refer to
Setting the
rear output and subwoofer controller
on page
30.
Using the equalizer
The equalizer lets you adjust the equalization
to match the car
’
s interior acoustic character-
istics as desired.
Audio Adjustments
En
25
English
Section
03
