Playing songs on iPod
For details about the supported iPod, refer to
iPod
®
compatibility on page 5.
Basic Operations
%
Fast forward or reverse
Push and hold
MULTI-CONTROL
left or right
for about one second and release.
%
Select a track (chapter)
Push
MULTI-CONTROL
left or right.
Notes
!
When using an iPod, iPod Dock Connector to
USB Cable is required.
!
Read the precautions for iPod on page 50.
!
While iPod is connected to this unit,
PIONEER
(or
(check mark)) is displayed on the iPod.
!
If an error message such as
ERROR-19
is dis-
played, refer to
Error messages
on page 46.
!
When the ignition switch is set to ACC or ON,
the iPod
’
s battery is charged while the iPod is
connected to this unit.
!
While the iPod is connected to this unit, the
iPod cannot be turned on or off.
!
Before connecting the dock connector of this
unit to the iPod, disconnect the headphones
from the iPod.
!
The iPod is turned off about two minutes after
the ignition switch is set to OFF.
Browsing for a song
Operations to control an iPod with this unit is
designed to be as close to the iPod as possible
to make operation and song search easy.
!
Depending on the number of files in the
iPod, there may be delay when displaying a
list.
!
If the characters recorded on the iPod are
not compatible with this unit, those charac-
ters are not displayed.
1
Press LIST to switch to the top menu of
the list search.
2
Use MULTI-CONTROL to select a cate-
gory.
Turn to change the category; press to select.
PLAYLISTS
(playlists)
—
ARTISTS
(artists)
—
ALBUMS
(albums)
—
SONGS
(songs)
—
PODCASTS
(podcasts)
—
GENRES
(genres)
—
COMPOSERS
(composers)
—
AUDIOBOOKS
(audiobooks)
List for the selected category is displayed.
#
You can start playback throughout the se-
lected category by pressing and holding
MULTI-CONTROL
. You can also perform this op-
eration by pushing and holding
MULTI-CONTROL
right.
#
You can also change the category by pushing
MULTI-CONTROL
up or down.
#
You can also select the category by pushing
MULTI-CONTROL
right.
#
To return to the previous list, push
MULTI-CONTROL
left.
3
Repeat step 2 to find a song you want
to listen to.
#
To return to the previous category (one level
higher), press
BACK
. You can also perform this
operation by pushing
MULTI-CONTROL
left.
#
To return to the top tier of categories, press
and hold
BACK
.
#
To return to the ordinary display, press
BAND
or
LIST
.
#
If you do not operate the list within about 30
seconds, the display automatically returns to the
ordinary display.
Displaying text information on
iPod
%
Press DISP to select the desired text in-
formation.
Play time
—
song title
—
artist name
—
album
title
#
If the characters recorded on the iPod are not
compatible with this unit, those characters are
not displayed.
Operating this unit
En
19
English
Section
02
