Pioneer DEH-7200SD, Operation Manual

Page: 7 / 28

1 2
5
3
b
Non-RDS or MW/LW
1
Band indicator
2
5
(stereo) indicator
3 LOC
indicator
Appears when local seek tuning is on.
4
Preset number indicator
5
Signal level indicator
6
TEXT indicator
Shows when the radio text is received.
7
PTY label indicator
8
Program service name
9
News ( ) indicator
Appears when the set news program is re-
ceived.
a
TP ( ) indicator
Appears when a TP station is tuned in.
b
Frequency indicator
Selecting a band
1
Press BAND / ESC until the desired band ( FM-1 ,
FM-2
,
FM-3
for FM or
MW/LW
) is displayed.
Manual tuning (step by step)
1
Push M.C. left or right.
Seeking
1
Push and hold M.C. left or right.
You can cancel seek tuning by pushing M.C. left
or right.
While pushing and holding
M.C.
left or right, you
can skip stations. Seek tuning starts as soon as
you release
M.C.
Using PI Seek
If the tuner cannot find a suitable station, or
reception status deteriorates, the unit automa-
tically searches for a different station with the
same programming. During the search,
PI seek is displayed and sound is muted.
Using Auto PI Seek for preset
stations
When preset stations cannot be recalled, the
unit can be set to perform PI Seek during pre-
set recall.
!
The default setting for Auto PI Seek is off.
Refer to
Auto PI
(auto PI seek) on page 16.
Storing and recalling stations
You can easily store up to six stations for each
band as presets.
1 Press (list).
Preset screen is displayed.
2 Use M.C. to store the selected fre-
quency in memory.
Turn to change the preset number. Press and
hold to store.
3 Use M.C. to select the desired station.
Turn to change the station. Press to select.
#
All stations stored for FM bands can be re-
called from each independent FM band.
#
You can also change the station by pushing
M.C. up or down.
#
To return to the ordinary display, press
BAND
/
ESC or (list).
Operating this unit
En
7
Section
02
Operating
this
unit