Pioneer DEH-7200SD, Operation Manual

Page: 10 / 28

!
When playing back VBR (variable bit
rate)-recorded MP3 files,
VBR is dis-
played instead of bit rate value.
!
When playing back VBR (variable bit
rate)-recorded AAC files, the average bit
rate value is displayed. However, de-
pending on the software used to decode
AAC files,
VBR may be displayed.
2 WMA/MP3/AAC/WAV
indicator
Shows the type of audio file currently playing
when the compressed audio is playing.
3
Folder number indicator
Shows the folder number currently playing
when the compressed audio is playing.
4
Track number indicator
5
PLAY / PAUSE indicator
6
S.Rtrv indicator
Appears when Sound Retriever function is on.
7
Song time (progress bar)
8
Play time indicator
Playing a CD/CD-R/CD-RW
1
Press the open button to open the front panel.
2
Insert the disc, label side up, into the disc loading
slot.
1
If a disc has already been inserted, press SRC /
OFF
to select the built-in CD player.
Ejecting a CD/CD-R/CD-RW
1
Press the open button to open the front panel.
2
Press h (eject).
Playing songs on a USB storage device
1
Open the USB connector cover.
2
Plug in the USB storage device using a USB
cable.
Stop playing a USB storage device
1
You may disconnect the USB storage device at
anytime.
Playing songs on an SD memory card
1
Press the open button to open the front panel.
2
Remove the front panel.
3
Insert an SD memory card into the SD card slot.
Insert it with the contact surface facing down and
press the card until it clicks and completely locks.
4
Re-attach the front panel.
5
Press SRC / OFF to select SD as the source.
Playback will start.
Stop playing an SD memory card
1
Press the open button to open the front panel.
2
Remove the front panel.
3
Press the SD memory card until it clicks.
The SD memory card is ejected.
4
Pull out the SD memory card.
5
Re-attach the front panel.
Selecting a folder
1
Push M.C. up or down.
Selecting a track
1
Push M.C. left or right.
Fast forwarding or reversing
1
Push and hold M.C. left or right.
Returning to root folder
1
Press and hold
BAND
/
ESC
.
Switching between compressed audio and CD-DA
1
Press BAND / ESC .
Notes
!
When playing compressed audio, there is no
sound during fast forward or reverse.
!
USB portable audio players that can be
charged via USB will be recharged when
plugged in and the ignition switch is set to
ACC or ON.
!
Disconnect USB storage device from unit
when not in use.
!
If plug and play is on and a USB storage de-
vice is present, depending on the type of de-
vice, the source may switch to
USB
automatically when you turn on the engine.
Please change plug and play setting as neces-
sary. Refer to
USB plug&play (plug and play)
on page 16.
Operating this unit
En
10
Section
02