#
Push
MULTI-CONTROL
left or right to display
the device name and BD address.
6
Press MULTI-CONTROL to establish con-
nection.
While connecting,
PAIRING
flashes. If the con-
nection is established,
PAIRED
is displayed.
#
If the connection fails,
ERROR
is displayed. In
this case, try again from the beginning.
#
PIN code is set to
0000
as the default. You
can change this code in the initial setting. Refer
to
Entering PIN code for Bluetooth wireless con-
nection
on page 31.
Disconnecting a Bluetooth device
This function can be operated only when the
Bluetooth wireless connection is being estab-
lished.
1
Display the connection menu.
Refer to
Introduction to connection operations
on page 27.
2
Use MULTI-CONTROL to select
DISCONNECT.
3
Push MULTI-CONTROL up or down to
select a device.
#
If only one device was found, this step cannot
be performed.
4
Press MULTI-CONTROL to disconnect
the Bluetooth wireless connection.
While disconnecting,
DISCONNECTING
flashes. If the Bluetooth wireless connection is
terminated,
DISCONNECTED
is displayed.
#
If multiple Bluetooth devices have been con-
nected and you wish to disconnect them, press
MULTI-CONTROL
and then select the device. In
this case, repeat operation from step 3.
Deleting a paired Bluetooth device
1
Display the connection menu.
Refer to
Introduction to connection operations
on page 27.
2
Use MULTI-CONTROL to select
DELETE DEVICE.
3
Push MULTI-CONTROL up or down to
select a device.
#
If only one device was found, this step cannot
be performed.
#
Push
MULTI-CONTROL
left to display the BD
address.
#
If device name cannot be obtained, BD ad-
dress is displayed.
4
When the device name is being dis-
played, push MULTI-CONTROL right to dis-
play DELETE YES.
Deleting device is now on standby.
#
If you do not want to delete the device, push
MULTI-CONTROL
left.
5
Press MULTI-CONTROL to delete the de-
vice.
While deleting,
DELETING
flashes. After the
device is deleted,
DELETED
is displayed.
Connecting a paired Bluetooth
device and selecting a service
Bluetooth service of the paired device can be
selected. You can choose a Bluetooth service
from
PHONE
service,
AVRCP
service or
A2DP
service.
1
Display the connection menu.
Refer to
Introduction to connection operations
on page 27.
2
Use MULTI-CONTROL to select
PAIRED DEVICE.
3
Push MULTI-CONTROL up or down to
select a device.
#
If only one device was found, this step cannot
be performed.
#
Push
MULTI-CONTROL
left or right to switch
the BD address and device name.
#
If device name cannot be obtained, BD ad-
dress is displayed.
Using Bluetooth wireless technology
En
29
English
Section
08
