Pioneer DEH-2490UB, Owner'S Manual

Page: 8 / 20

REPEAT (repeat play)
1
Press M.C. to select a repeat play range.
For details, refer to Selecting a repeat play range
on the previous page.
SHUFFLE
(shuffle)
1
Press M.C. to select your favorite setting.
!
SNG
–
Play back songs in the selected list
in random order.
!
ALB
–
Play back songs from a randomly se-
lected album in order.
!
OFF
–
Cancel random play.
SHUFFLE ALL
(shuffle all)
1
Press M.C. to turn shuffle all on.
To turn off, set SHUFFLE in the FUNCTION
menu to off.
LINK PLAY (link play)
1
Press
M.C.
to display the setting mode.
2
Turn M.C. to change the mode; press to select.
For details about the settings, refer to Playing
songs related to the currently playing song on
the previous page.
PAUSE (pause)
1
Press M.C. to pause or resume.
AUDIO BOOK (audiobook speed)
1
Press
M.C.
to display the setting mode.
2
Turn
M.C.
to select your favorite setting.
!
FASTER
–
Playback at a speed faster than
normal
!
NORMAL
–
Playback at normal speed
!
SLOWER
–
Playback at a speed slower
than normal
3
Press M.C. to confirm the selection.
S.RTRV (sound retriever)
Automatically enhances compressed audio and
restores rich sound.
1
Press M.C. to select the desired setting.
For details, refer to Enhancing compressed
audio and restoring rich sound (sound retriever)
on the previous page.
Audio adjustments
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select AUDIO.
3 Turn M.C. to select the audio function.
After selecting, perform the following proce-
dures to set the audio function.
FAD/BAL (fader/balance adjustment)
1
Press
M.C.
to display the setting mode.
2
Press M.C. to cycle between fader (front/rear)
and balance (left/right).
3
Turn M.C. to adjust speaker balance.
!
When the rear output and RCA output setting
are
SW
, you cannot adjust front/rear speaker
balance. Refer to REAR-SP (rear output setting)
on the next page. Refer to PREOUT (preout set-
ting) on the next page.
PRESET EQ (equalizer recall)
1
Press M.C. to display the setting mode.
2
Turn
M.C.
to select the equalizer.
DYNAMIC
—
VOCAL
—
NATURAL
—
CUSTOM
—
FLAT
—
POWERFUL
3
Press M.C. to confirm the selection.
!
You can also switch the equalizer by pressing
repeatedly (DEH-2490UB).
TONE CTRL (equalizer adjustment)
!
Adjusted equalizer curve settings are stored in
CUSTOM .
1
Press M.C. to display the setting mode.
2
Press M.C. to select BASS (bass)/ MID (mid)/
TREBLE (treble).
3
Turn
M.C.
to adjust the level.
Adjustment range: +6 to
–
6
LOUD
(loudness)
Loudness compensates for deficiencies in the low-
frequency and high-frequency ranges at low vol-
ume.
1
Press M.C. to select the desired setting.
OFF (off)
—
LOW (low)
—
HI (high)
SUB.W (subwoofer on/off setting)
This unit is equipped with a subwoofer output
which can be turned on or off.
!
This function is not available for DEH-2490UB.
1
Press M.C. to select the desired setting.
NOR
(normal phase)
—
REV
(reverse phase)
—
OFF (subwoofer off)
SUB.W CTRL
(subwoofer adjustment)
The cut-off frequency and output level can be ad-
justed when the subwoofer output is on.
Only frequencies lower than those in the selected
range are outputted from the subwoofer.
!
This function is not available for DEH-2490UB.
!
When you select OFF in SUB.W , you cannot se-
lect this function. For details, refer to
SUB.W
(subwoofer on/off setting) on this page.
1
Press M.C. to display the setting mode.
2
Press M.C. to cycle between the cut-off fre-
quency and output level of the subwoofer.
Cut-off frequency (Cut-off frequency display
flashes.)
—
Output level (Output level display
flashes.)
3
Turn M.C. to select the desired setting.
Cut-off frequency: 50HZ
—
63HZ
—
80HZ
—
100HZ
—
125HZ
Output level:
–
24 to +6
SLA (source level adjustment)
SLA (Source level adjustment) lets you adjust the
volume level of each source to prevent radical
changes in volume when switching between sour-
ces.
!
Settings are based on the FM volume level,
which remains unchanged.
!
The MW volume level can also be adjusted
with this function.
!
When selecting FM as the source, you cannot
switch to
SLA .
1
Press M.C. to display the setting mode.
2
Turn M.C. to adjust the source volume.
Adjustment range: +4 to
–
4
3
Press
M.C.
to confirm the selection.
Initial settings
1 Press and hold SRC/OFF until the unit
turns off.
2 Press M.C. and hold until function name
appears in the display.
3 Turn M.C. to select the initial setting.
After selecting, perform the following proce-
dures to set the initial setting.
CLOCK SET (setting the clock)
1
Press M.C. to display the setting mode.
2
Press M.C. to select the segment of the clock
display you wish to set.
Hour
—
Minute
3
Turn M.C. to adjust the clock.
FM STEP (FM tuning step)
Operating this unit
8
Section
Operating this unit
En
02