Pioneer DEH-2490UB, Owner'S Manual

Page: 9 / 20

Normally, the FM tuning step employed by seek
tuning is 50 kHz. When AF or TA is on, the tuning
step automatically changes to 100 kHz. It may be
preferable to set the tuning step to 50 kHz when
AF is on.
!
The tuning step remains at 50 kHz during man-
ual tuning.
1
Press M.C. to select the FM tuning step.
50 (50 kHz)
—
100 (100 kHz)
MW STEP (MW tuning step)
The MW tuning step can be switched between
9 kHz and 10 kHz.
1
Press
M.C.
to select the MW tuning step.
9 (9 kHz)
—
10 (10 kHz)
AUTO-PI (auto PI seek)
The unit can automatically search for a different
station with the same programming, even during
preset recall.
1
Press M.C. to turn Auto PI seek on or off.
AUX (auxiliary input)
Activate this setting when using an auxiliary de-
vice connected to this unit.
1
Press M.C. to turn AUX on or off.
USB PNP (plug and play)
This setting allows you to switch your source to
USB / iPod automatically.
1
Press M.C. to turn the plug and play function
on or off.
ON
–
When a USB storage device/iPod is con-
nected, depending on the type of device, the
source is automatically switched to
USB / iPod
when you turn on the engine. If you disconnect
your USB storage device/iPod, this unit
’
s
source is turned off.
OFF
–
When a USB storage device/iPod is con-
nected, the source is not switched to USB /
iPod automatically. Please change the source
to USB / iPod manually.
REAR-SP (rear output setting)
The rear speaker leads output can be used for full-
range speaker or subwoofer connection.
If you switch to
SW , you can connect a rear speak-
er lead directly to a subwoofer without using an
auxiliary amp.
Initially,
REAR-SP is set for rear full-range speaker
connection ( FUL ).
1
Press
M.C.
to select the desired setting.
FUL
—
SW
!
Even if you change this setting, there will
be no output if you select
OFF in SUB.W
(Refer to SUB.W (subwoofer on/off setting)
on the previous page).
!
If you change this setting, subwoofer out-
put in the audio menu will return to the fac-
tory settings.
PREOUT (preout setting)
The RCA outputs can be used for rear speaker or
subwoofer connection.
If you switch to
SW , you can connect a rear speak-
er lead directly to a subwoofer without using an
auxiliary amp.
Initially,
PREOUT
is set for rear full-range speaker
connection ( SW ).
1
Press M.C. to select the desired setting.
SW
—
REA
!
Even if you change this setting, there will
be no output if you select
OFF
in
SUB.W
(Refer to SUB.W (subwoofer on/off setting)
on the previous page).
!
If you change this setting, subwoofer out-
put in the audio menu will return to the fac-
tory settings.
DEMO
(demo display setting)
1
Press M.C. to turn the demo display on or off.
SCROLL (scroll mode setting)
When ever scroll is set to ON , recorded text infor-
mation scrolls continuously in the display. Set to
OFF if you prefer the information to scroll just
once.
1
Press
M.C.
to turn the ever scroll on or off.
Selecting the illumination color
Only for DEH-3490UB
This unit is equipped with multiple-color illumi-
nation. You can select desired colors for the keys
and display of this unit. You also can customize
the colors you want to use.
Selecting the key color from the
illumination color list
Only for DEH-3490UB
You can select desired colors for the keys of this
unit.
1 Press .
2 Turn M.C. to display KEY COLOR and
press to select.
3 Turn M.C. to select the illumination color.
You can select one option from the following list.
!
30 preset colors ( WHITE to ROSE )
!
SCAN
(cycle through all colors)
!
3 sets of colors ( WARM , AMBIENT , CALM )
!
CUSTOM (customized illumination color)
4 Press M.C. to confirm the selection.
Notes
!
When SCAN is selected, the system auto-
matically cycles through the 30 preset colors.
!
When WARM is selected, the system auto-
matically cycles through the warm colors.
!
When AMBIENT is selected, the system au-
tomatically cycles through the ambient col-
ors.
!
When
CALM
is selected, the system auto-
matically cycles through the calm colors.
!
When CUSTOM is selected, the customized
color saved is selected.
!
To cancel selecting the illumination color,
press
.
Selecting the display color from
the illumination color list
Only for DEH-3490UB
You can select the desired colors for the display
of this unit.
1 Press .
2 Turn M.C. to display DISP COLOR and
press to select.
3 Turn M.C. to select the illumination color.
You can select one option from the following list.
!
30 preset colors ( WHITE to ROSE )
!
SCAN (cycle through all colors)
!
3 sets of colors (
WARM
,
AMBIENT
,
CALM
)
!
CUSTOM (customized illumination color)
4 Press M.C. to confirm the selection.
Note
For details about colors on the list, refer to Se-
lecting the key color from the illumination color
list
on this page.
Selecting key and display color
from the illumination color list
Only for DEH-3490UB
You can select the desired colors for the keys
and display of this unit.
1 Press .
English
Operating this unit
9
Section
Operating this unit
En
02