21
En
03
Switching the output
video resolution
Use the procedure below to switch the output video
resolution from the various video output terminals.
1
Press HDMI.
• The current output video resolution setting is
displayed on the player’s front panel display.
To switch the output video resolution, press
HDMI
again.
• The output video resolution setting can also be
switched by selecting
Resolution
from the
Initial
Setup
menu (page 38).
Caution
• On some devices (TV, AV receiver or amplifier, etc.),
the video or audio may not be output properly when
the resolution is switched. If this happens, use
HDMI
to set a resolution at which the video and audio are
properly output.
• When video signals are being output with a
resolution of 4K/24p, 1080/50i, 1080/50p, 720/50p,
1080/24p, 1080/60i, 1080/60p or 720/60p from the
HDMI OUT
terminals, the picture may be output with
an aspect ratio of 16:9, even if the
TV Aspect Ratio
is set to
4:3 (Standard)
.
• The picture may not be displayed for a while when
the resolution is switched.
• When the connected device supports 3D and if a 3D
Disc is played back, the 3D output is prioritized for
output, regardless of the resolution settings. Also,
switching of resolution may not be possible while the
3D contents are playing.
• When
Auto
is selected, the picture is output at 60
frames/second if your TV is not compatible with
1080/24p signals.
• When
4K/24p
,
1080/24p
is selected, the signals are
output as such, even if your TV is not compatible with
4K/24p or 1080/24p signals. If the picture is not
displayed properly, use
HDMI
to set an output video
resolution at which the video and audio signals are
properly output.
• When the unit is set to [
Auto
] and is playing 24p
content, the TV outputs the content at 4K/24p, if the
TV you are using supports 4K/24p output. If the
connected television set does not support 4K/24p,
then the output is made with a recommended
resolution other than 4K/24p.
• When the
Resolution
is set to
Auto
, 1080p, 4K/24p
and if the resolution of output from the HDMI is
1080p, 4K/24p, then output may not occur
depending on the HDMI cable in use.
• There are resolutions that cannot be output
depending on the television set in use.
BDP-X300_72-BDPX300-GBRB1_En.book 21 ページ ２０１６年５月２４日 火曜日 午後１時１０分
