Pioneer BDP-140, Operating Instructions Manual

Page: 44 / 192

07
44
En
 Setting the IP address
1 Select and set Network

IP setting

Next
Screen.
Use

/

to select, then pr ess ENTER .
2 Set IP address.
Use

/

/

/

to set the IP add r ess of the p laye r o r DNS
se r ve r , then pr ess ENTER .
• Auto Set IP Address
On
– The p laye r ’s IP add r ess is obtained
automatically. Select this when using a b r oadband
r oute r o r b r oadband modem that has a DHCP
(Dynamic Host Configu r ation P r otocol) se r ve r
function. This p laye r ’s IP add r ess will automatically
be allocated f r om the DHCP se r ve r .
Off – The p laye r ’s IP add r ess must be set manually.
Use the numbe r buttons (0 to 9) to in p ut the IP
add r ess, subnet mask and default gateway.
• Auto Set DNS Server Address
On – The DNS se r ve r ’s IP add r ess is obtained
automatically.
Off – The DNS se r ve r ’s IP add r ess must be set
manually. Use the numbe r buttons (0 to 9) to in p ut the
DNS se r ve r ’s IP add r ess sti p ulated by you r Inte r net
se r vice pr ovide r .
Note
• When
Auto Set IP Address
is set to
Off
,
Auto Set
DNS Server Address is also set to Off .
• Fo r info r mation on the DHCP se r ve r function, r efe r to
the o p e r ating inst r uctions fo r the netwo r k device.
• You may need to contact you r Inte r net se r vice
pr ovide r o r netwo r k administ r ato r when in p utting the
IP add r ess manually.

Setting the proxy server
Only set the pr oxy se r ve r if so inst r ucted by you r Inte r net
se r vice pr ovide r .
1 Select and set Network

Proxy Server

Next
Screen.
Use

/

to select, then pr ess ENTER .
2 Select and set Use or Not use at Proxy Server.
Use

/

to change, then pr ess

.
•
Use
– Select this when using a pr oxy se r ve r .
• Not use – Select this when not using a pr oxy se r ve r .
If you have selected Use , pr oceed to ste p 3.
3 Select and set Server Select Method.
Use

/

to change, then pr ess

.
•
IP Address
– In p ut the IP add r ess.
• Server Name – In p ut the se r ve r name.
4 Input IP Address or Server Name.
Use the numbe r buttons (0 to 9) to in p ut the numbe r if you
select IP add r ess in ste p 3. Use

/

to move the cu r so r .
Use the numbe r buttons (0 to 9) to in p ut cha r acte r s if you
select Se r ve r Name in ste p 3.
The cha r acte r s that can be in p ut fo r the se r ve r name a r e
listed on the table below. P r essing a button r e p eatedly
cycles th r ough the cha r acte r s shown.
• If you want to ente r two cha r acte r s in succession that
a r e both on the same button (fo r exam p le a P and an
R
), pr ess

afte r in p utting the fi r st cha r acte r then
in p ut the second cha r acte r .
• Use
CLEAR
to delete the last cha r acte r .
• Use

/

to move the dis p layed cha r acte r s when all
the in p ut cha r acte r s cannot be dis p layed.
5 Input Port Number.
P r ess

, then use the numbe r buttons (0 to 9) to in p ut
the numbe r .
6 Press ENTER to set.

Displaying the network settings

Select and set Network

Information

Next
Screen.
Use

/

to select, then pr ess ENTER .
The MAC add r ess, IP add r ess, subnet mask, default
gateway and DNS se r ve r ( pr ima r y and seconda r y)
settings a r e dis p layed.
When Auto Set IP Address is set to On , the values
obtained automatically a r e dis p layed.
Note
• “0.0.0.0” is dis p layed when each IP add r ess has not
been set.
 Testing the network connection

Select and set Network

Connection Test

Start.
Use

/

to select, then pr ess ENTER .
“Netwo r k connection test com p leted successfully.” is
dis p layed once the test is com p leted. If any othe r
message is dis p layed, check the connections and/o r
settings ( p age 22).
Key Characters Key Characters
1
1. –
6
m n o 6
2
a b c 2
7
p q r s 7
3
d e f 3
8
t u v 8
4 g h i 4 9 w x y z 9
5 j k l 5 0 0
BDP-140_UCXCNSM_IBD_EN.book Page 44 Tuesday, July 19, 2011 10:54 AM