47
En
06
Changing the speaker setup
Set whether or not speakers are connected to the AV receiver or
amplifier, as well as the size of the speakers. This setting is only valid
for the
AUDIO OUT (7.1 ch)
terminals.
Caution
• The
Speaker Setup
cannot be selected when
Audio Output
Mode
is set to
2 Channel
. Change the setting to
Multi-channel
(page 45).
1
Select and set Speakers
Speaker Setup
Next Screen.
Use
/
to select, then press
ENTER
.
2
Select the speaker and change the setting.
Use
/
to select, then use
/
to change the setting.
•
L/R
(front left and right speakers):
Large
/
Small
•
C
(center speaker):
Large
/
Small
/
None
•
SL/SR
(left and right surround speakers):
Large
/
Small
/
None
•
SBL/SBR
(left and right surround back speakers):
Large
/
Small
/
None
•
SW
(subwoofer):
Yes
/
No
Note
• Depending on the combination of settings of the different
speakers, the settings of speakers other than the one you have
changed may also change automatically.
Adjusting the distance of the different
speakers
Adjust the distance between you and the different speakers. This
setting is only valid for the
AUDIO OUT (7.1 ch)
terminals.
Caution
• This cannot be selected when
Audio Output Mode
is set to
2
Channel
. Change the setting to
Multi-channel
(page 45).
•
Speaker Distance
of the speakers set to
None
or
No
at
Speaker
Setup
cannot be adjusted (above).
1
Select and set Speakers
Speaker Distance
Next
Screen.
Use
/
to select, then press
ENTER
.
2
Select the speaker and adjust the distance.
Use
/
to select, then use
/
to adjust.
• The distance of all the speakers can be set to between 1 inch and
45 feet, in units of 1 inch.
Adjusting the output level of the different
speakers (Channel Level)
Adjust each output level of the different speakers by using test tones.
This setting is only valid for the
AUDIO OUT (7.1 ch)
terminals.
Caution
• This cannot be selected when
Audio Output Mode
is set to
2
Channel
. Change the setting to
Multi-channel
(page 45).
•
Channel Level
of the speakers set to
None
or
No
at
Speaker
Setup
cannot be adjusted (above).
• Test tones are output. Lower the volume of the device connected
to the player.
1
Select and set Speakers
Channel Level, then Fix or
Variable.
Use
/
to select, then press
ENTER
.
•
Fix
– The output level of all the speakers is set to the maximum.
•
Variable
– The output level of all the speakers is set 6.0 dB lower
than when
Fix
is selected. From this point, the output levels of
the
L
,
C
,
R
,
SL
,
SR
,
SBL
,
SBR
and
SW
speakers can be adjusted
within the range of –6.0 dB to +6.0 dB.
If you have selected
Variable
, proceed to step 2.
2
Select and set the method for switching the speaker to be
adjusted.
Use
/
to select, then press
ENTER
.
•
Auto
– Switch the speaker to be adjusted automatically.
•
Manual
– Switch the speaker to be adjusted manually.
L/R
C
SL/SR
SBL/SBR
SW
Large
Large
Large
Large
Yes
Speaker Setup
BD PLAYER
L
C
R
SR
SBR
SBL
SL
SW
Speaker Distance
BD PLAYER
10’00”
10’00”
10’00”
10’00”
10’00”
10’00”
10’00”
10’00”
Test Tone Switching
Select whethe
r
test tone out
p
ut is
switched automatically o
r
manually.
Speaker Setup
BD PLAYER
Auto
Manual
Video Out
Audio Out
S
p
eake
r
s
HDMI MAIN
HDMI SUB
Playback
Language
Pa
r
ental Lock
