
67
En
07
Sound and picture are not
synchronized.
Is
Output Terminal
properly set?
Set
Output Terminal
properly (pages 21 and 44).
Is
Lip Sync
properly set?
Adjust the amount of audio delay with the
Lip Sync
setting
(page 42).
• No sound is output.
• Sound is not output
properly.
Is the disc played back in slow motion?
Is the disc played back in fast forward or fast reverse?
No sound is output during slow motion play and forward and
reverse scanning.
Are the audio cables properly connected?
• Connect the cable properly according to the connected
devices (page 15).
• Insert the cable firmly and all the way in.
Is the audio cable damaged?
If the cable is damaged, replace it with a new one.
Are the connected components (AV receiver or amplifier, etc.)
properly set?
Read the operating instructions of the connected components
and check the volume, input, speaker settings, etc.
Is
Output Terminal
properly set?
When
ANALOG AUDIO
is selected at
Output Terminal
, no
audio signals are output from the
HDMI OUT
or
DIGITAL OUT
terminals (page 44).
Is the output video resolution properly set?
Use
OUTPUT RESOLUTION
to switch to the resolution at
which the video and audio signals are output (page 25).
Is the AV receiver or amplifier, etc., connected to the
AUDIO
OUT (7.1 ch)
terminals?
To listen to 2-channel analog audio, connect to
FRONT (L/R)
of
the
AUDIO OUT (7.1 ch)
terminals (page 14) and set
Audio
Output Mode
to
2 Channel
(page 45).
Are the speakers properly set?
When the AV receiver or amplifier, etc., is connected to the
AUDIO OUT (7.1 ch)
terminals and
Audio Output Mode
is
set to
Multi-channel
, set
Speaker Setup
properly (page 47).
Is Pure Audio set to
Mode 1
or
Mode 2
?
If set to
Mode 1
or
Mode 2
, signals are only output from the
output terminal set at
Output Terminal
(page 53).
Is a DVI device connected?
The sound will not be output from the
HDMI OUT
terminals if a
DVI device is connected. Connect the device to a
DIGITAL OUT
terminals or the
AUDIO OUT (7.1 ch)
terminals (page 18).
Are you playing a DTS-CD?
To output the sound of DTS-CDs from the
HDMI OUT (SUB)
terminal, set
HDMI Audio Out
to
PCM
(page 45).
For some BDs, audio signals are only output from
DIGITAL
OUT
terminals or the
HDMI OUT
terminals.
Multi-channel sound is not
output.
Is
Output Terminal
properly set?
Linear PCM (2-channel) audio signals are output from output
terminals other than the one set at
Output Terminal
under
Audio Out
. Set
Output Terminal
properly (page 44).
Is the AV receiver or amplifier connected to the
HDMI OUT
(SUB)
terminal?
The
HDMI OUT (SUB)
terminal outputs linear PCM 2-channel
audio signals. Be sure to connect the AV receiver or amplifier
to the
HDMI OUT (MAIN)
terminal.
Is the audio output of the connected AV receiver or amplifier,
etc., properly set?
Read the operating instructions of the connected AV receiver
or amplifier and check the audio output settings of AV receiver
or amplifier.
Is multi-channel sound selected?
Use the menu screen or
AUDIO
to switch the disc’s sound to
multi-channel.
Is the AV receiver or amplifier, etc., connected to the
AUDIO
OUT (7.1 ch)
terminals?
When the AV receiver or amplifier, etc., is connected to the
AUDIO OUT (7.1 ch)
terminals, set
Audio Output Mode
to
Multi-channel
(page 45). Also, set
Speaker Setup
properly
(page 47).
Noise can be heard when
outputting DTS Digital
Surround signals from the
DIGITAL OUT
terminals.
Is the connected AV receiver or amplifier compatible with DTS
Digital Surround?
If an AV receiver or amplifier that is not compatible with DTS
Digital Surround is connected to the
DIGITAL OUT
terminals,
set
DTS Out
to
DTS
PCM
(page 44).
192 kHz or 96 kHz digital
audio signals cannot be
output from the
DIGITAL
OUT
terminals.
It is not possible to output 192 kHz or 96 kHz digital audio
signals from this player’s
DIGITAL OUT
terminals. The signals
are automatically converted to 48 kHz or less for output.
Secondary audio or
interactive audio is not
output.
Is
HDMI Audio Out
properly set?
When listening to the sound from an
HDMI OUT (MAIN)
terminal, set
HDMI Audio Out
to
PCM
(page 45).
Are
Dolby Digital Out
and
DTS Out
properly set?
When listening to the sound from an
DIGITAL OUT
terminal,
set
Dolby Digital Out
to
Dolby Digital 1
,
DTS Out
to
DTS 1
(page 44).
Problem
Check
Remedy