En
g
lis
h
- 9 -
WARNING
•
Keep hands and fingers clear of this product when opening, closing, or adjusting the LCD panel. Be
especially cautious of children’s hands and fingers.
•
Do not use with the LCD panel left open. It may result in injury in the event of an accident.
CAUTION
•
Do not open or close the LCD panel forcefully. It may cause a malfunction.
•
Do not operate this product until the LCD panel has completely opened or closed. If this product is
operated while the LCD panel is opening or closing, the LCD panel may stop at that angle for safety.
•
Do not place glass or can on the open LCD panel.
1
Press .
2
Touch
or
to adjust the angle of the LCD panel.
3
Touch .
Returns to the previous screen.
CAUTION
•
Pressing the RESET button resets settings and recorded contents to the factory settings.
– Do not perform this operation when a device is connected to this product.
– Some of the settings and recorded contents will not be reset.
•
The microprocessor must be reset under the following conditions:
– Prior to using this product for the first time after installation.
– If this product fails to operate properly.
– If there appears to be problems with the operation of the system.
– If your vehicle position is shown on the map with a significant positioning error.
1
Turn the ignition switch OFF.
2
Press RESET with a pen tip or other pointed tools.
Basic operation
Notes on using the LCD panel
Adjusting the LCD panel angle
Resetting the microprocessor
Z930DAB Z830DAB
Z930DAB Z830DAB