9
Connecting the System
Connecting the multi-channel processor
Black
Optical cable connection box
(supplied with multi-channel processor)
Blue
(GUIDE SP OUT)
Guide speaker
(e.g. CD-TS37GP)
(sold separatly)
The navigation unit
20 cm (7-7/8 in.)
Blue
Light Gray
(DIGITAL OUTPUT)
RCA connector 2
23 cm (9 in.)
RCA
connector 1
Secure the connector using the screw
supplied with multi-channel processor.
Yellow/black (GUIDE ON)
When combining this navigation unit
with the multi-channel processor system,
connect this lead to yellow/black lead on
the multi-channel processor controller
unit. In this way, when the mute signal is
output from this navigation system, the
audio volume is automatically muted or
attunated.
Note:
When Pioneer multi-channel processor (sold separately) is
connected to this navigation system, make sure the “5.1 Ch
Setup” mode is activated. Please find the correct setting by
referring to “Switching the 5.1ch setting” in the Operation
Manual of the navigation system.
