Before installing the base unit
1
Press the Detach button to release the
detachable device.
2
Gently grip both sides of the detach-
able device and slowly pull it out.
p
Take care not to drop the detachable device
and protect it from contact with water or
other fluids to prevent permanent damage.
p
Do not forcibly pull the detachable device
from the base unit, as doing so may da-
mage the connector.
Installing with self-tapping screws
%
Secure it firmly using the self-tapping
screws.
Self-tapping screw
Base unit
Surface of the glove
compartment or similar
location
Drill 2 mm to 2.5 mm (1/8 in.) diameter holes.
Installing with the hook and
loop fastener
1
Thoroughly wipe off both surfaces be-
fore affixing the hook and loop fastener.
2
Peel off the protective sheet and attach
the hook and loop fastener.
Protective sheet
Base unit
En
11
English
Section
04
Installation
