After installing this
navigation system
CAUTION
After installing this navigation system, be
sure to check at a safe place that the vehicle
is performing normally.
It may take a few minutes to start up the navi-
gation system when you start up the system
for the first time or the outside temperature is
not within the charging range. Wait until the
battery charging starts.
1
Reconnect the negative (
–
) terminal of
the vehicle
’
s battery.
First, double-check that all connections are
correct and that this product is installed cor-
rectly. Reassemble all vehicle components
that you previously removed. Then reconnect
the negative (
–
) cable to the negative (
–
) term-
inal of the battery.
2
Start the engine.
3
Press the RESET button.
Press the
RESET
button on the navigation unit
with a pointed object such as the tip of a pen.
RESET
button
After a short pause, the navigation screen re-
turns.
p
If the navigation screen does not return
after a while, press the
MODE
button of the
AV receiver to switch the screen.
4
Make the following settings.
=
For details concerning operations, refer to
Operation Manual.
1
Set the language.
2
Drive an unobstructed road until the GPS
starts receiving the signal normally.
3
Make some necessary adjustments.
!
Setting the time
!
Change other settings as you prefer
En
15
English
Section
05
After installation
