![background image](http://html.mh-extra.com/html/pioneer/avic-f930bt/avic-f930bt_service-manual_326126018.webp)
AVIC-X930BT/XNUC
18
1
2
3
4
1
2
3
4
C
D
F
A
B
E
Connecting
the
pow
er
cor
d
(1)
ISO connector
*1
*3
*2
*4
Speaker leads
White:
F
ront lef
t
White/black:
F
ront lef
t
Grey
:
F
ront
right
Grey/black:
F
ront
right
Green:
R
ear
lef
t
or
Subwoofer
(*5)
Green/black:
R
ear
lef
t
or
Subwoofer
(*5)
V
iolet:
R
ear
right
or
Subwoofer
(*5)
V
iolet/black:
R
ear
right
or
Subwoofer
(*5)
Depending on the types of vehicles, the
function of *2 and *4 may be different. In this
case, be sure to connect *1 to *4 and *3 to *2
as shown in the figure.
Connect leads of the
same colour to each other
.
Y
ellow
(*2)
Back-up
(or accessor
y)
Red
(*4)
Accessor
y
(or back-up)
Y
ellow
(*1)
T
o terminal supplied with
power regardless of ignition
switch position
.
Red
(*3)
T
o electric terminal controlled by
ignition switch (12 V DC) ON/OFF
.
Orange/white
T
o lighting switch terminal.
Black (earth)
T
o vehicle (metal) body
.
Note
Notes
When a subwoofer (*5) is connected to this
navigation system instead of a rear speaker
, change
the rear output setting in the initial setting. (R
efer to
Operation Manual.) The subwoofer output of this
navigation system is monaural.
When using a subwoofer of 70 W (2 ), be sure to
connect with violet and violet/black leads of this
navigation system. Do not connect anything with
green and green/black leads.
In some vehicles, the ISO connector may be divided
into two
. In this case, be sure to connect to both
connectors.
Note
The navigation unit
Blue/white
(*6)
Blue/white
(*7)
T
o auto
-aerial relay control
terminal (max. 300 mA 12 V DC).
The pin position of the ISO connector will differ
depending on the types of vehicles. Connect *6
and *7 when P
in 5 is an aerial control type. In
other types of vehicles, never connect *6 and *7.
Y
ellow/black
If you use an equipment with mute function
, connect that
equipment to the Audio Mute lead. If not, keep this lead free of any
connections.
P
ower cord
Audio source will be set to mute or attenuate, while the following
sounds will not be muted or attenuated. F
or details, refer to
Operation Manual.
— V
oice guidance of the navigation
— Incoming ringtone and incoming voice of the mobile phone
that is connected to this navigation system via Bluetooth
wireless technology
15 cm
Note
RCA connector
F
use (10 A)
AVIC-F930BT/XNAU
Summary of Contents for AVIC-F930BT
