!
Buildings
This setting shows or hides 3D city models
which are 3D artistic or block representa-
tions of complete city building data con-
taining actual building sizes and actual
positions on the map.
p
For AVIC-F970DAB, AVIC-F970BT, AVIC-
F9770DAB and AVIC-F9770BT, this func-
tion becomes effective only when the
additional map data is installed.
!
3D Terrain
This setting shows or hides the 3D eleva-
tion of the surrounding terrain.
!
Track Logs
You can turn on or off track log saving
which saves the sequence of the locations
you go through on your journeys.
!
Place Markers
You can select which POI icons to show on
the map while navigating.
p
When a large number of POI icons exist
on a map display, maps and POI icons
become hard to see. To maintain map
and POI visibility, reduce the displayed
categories as much as possible.
Data Fields
You can choose to have different values dis-
played for when navigating a route to a select
destination and for when just cruising around
without any particular destination.
=
For details, refer to
“
First
”
,
“
Second
”
and
“
Third
”
selects items
displayed in the data fields shown when the
route exists.
“
Without Route
”
selects the
items displayed in the data fields shown when
a route does not exist.
Route Progress Bar
You can turn on the route progress bar to dis-
play the current route as a straight line located
on the right side of the map. The arrow repre-
sents your current position and moves up the
line as you travel along the route. Waypoints
and traffic event markers are also displayed on
the line.
Offer Motorway Services
You may need to stop by a petrol station or a
restaurant during your journey.
=
For details, refer to
Services Displayed
You can select the service types displayed for
the motorway exits or service stations. Choose
from the POI categories.
Automatic Overview
When selected, the map zooms out to show
an overview of the surrounding area if the next
route event (manoeuvre) is far. When you get
close to the event, the map returns to the nor-
mal map view.
Signposts
Whenever adequate information is available,
lane information similar to the real ones on
road signs above the road is displayed at the
top of the map. You can turn this feature on or
off.
Junction View
If you are approaching a motorway exit or a
complex intersection and the necessary infor-
mation is available, the map is replaced with a
3D view of the junction.
Tunnel View
When entering tunnels, the surface roads and
buildings can be distracting. This feature
shows a generic picture of a tunnel instead of
the map. A top-down overview of the tunnel
and remaining distance are also displayed.
Offer Congestion Detour on Highways
When you slow down while driving on a motor-
way due to a traffic jam, this navigation system
offers you a detour using the next exit. The
message shows you the distance to the exit
and the difference in the distance and esti-
mated time compared to the original route.
You can choose from one of the following op-
tions:
Engb
63
Chapter
10
Customising
pr
eferences
of
the
navigation
Customising preferences of the navigation
