Message
Cause
Action
Error-02-9X/-
DX
Communication
failed.
Perform one of
the following op-
erations.
–
Turn the ignition
switch OFF and
back ON.
–
Disconnect the
USB portable
audio player/USB
memory.
–
Change to a dif-
ferent source.
Then, return to
the USB portable
audio player/USB
memory.
It is not pos-
sible to write
it in the
flash.
This unit
’
s flash
memory used
as the tempo-
rary storage
area is full.
Select a file that
can be played.
Format Read
Sometimes
there is a delay
between the
start of playback
and when you
start to hear any
sound.
Wait until the
message disap-
pears and you
hear sound.
Audio For-
mat not sup-
ported
This type of file
is not supported
on this unit.
Select a file that
can be played.
iPod
Message
Cause
Action
Format Read
Sometimes
there is a delay
between the
start of playback
and when you
start to hear any
sound.
Wait until the
message disap-
pears and you
hear sound.
Error-02-6X/-
9X/-DX
Communication
failed.
Disconnect the
cable from the
iPod. Once the
iPod
’
s main
menu is dis-
played, reconnect
the iPod and reset
it.
iPod failure.
Disconnect the
cable from the
iPod. Once the
iPod
’
s main
menu is dis-
played, reconnect
the iPod and reset
it.
Error-02-67
The iPod firm-
ware version is
old.
Update the iPod
version.
Stop
There are no
songs.
Transfer songs to
the iPod.
There are no
songs in the
current list.
Select a list that
contains songs.
Not Found
No related
songs.
Transfer songs to
the iPod.
Bluetooth
Message
Cause
Action
Error-10
The power failed
for the
Bluetooth mod-
ule of this unit.
Turn the ignition
switch OFF and
then to ACC or
ON.
If the error mes-
sage is still dis-
played after
performing the
above action,
please contact
your dealer or an
authorized
Pioneer Service
Station.
Understanding auto EQ error
messages
When correct measurement of the car
’
s interior
acoustic characteristics is not possible using
auto EQ, an error message may appear on the
display. In such cases, refer to the table below to
see what the problem is and how it may be cor-
rected. After checking, try again.
Message
Cause
Action
Please con-
nect the mi-
crophone for
measure-
ment. When
finished,
please push
HOME key.
The microphone
is not con-
nected.
Plug the optional
microphone se-
curely into the
jack.
Message
Cause
Action
Error. Please
check xxxx
speaker.
The microphone
cannot pick up
the measuring
tone of a speak-
er.
!
Confirm that
the speakers are
connected cor-
rectly.
!
Correct the
input level setting
of the power amp
connected to the
speakers.
!
Plug the micro-
phone securely
into the jack.
Error. Please
check noise.
The surround-
ing noise level
is too high.
!
Stop your car in
a place that is
quiet, and switch
off the engine, air
conditioner and
heater.
!
Set the micro-
phone correctly.
Error. Please
check bat-
tery.
Power is not
being supplied
from the battery
to this unit.
!
Connect the
battery correctly.
!
Check the bat-
tery voltage.
Additional information
50
Appendix
Additional information
En
<CRD4714-A/N>50
