4
Press the home button to switch to the
home display.
5
Touch the system key to open the sys-
tem menu.
6
Touch Auto EQ Measurement to enter
auto EQ measurement mode.
7
Plug the microphone into the micro-
phone input jack on this unit.
AVH-X5500BT
AVH-X3500DAB, AVH-X2500BTand AVH-
X1500DVD
AUX input
(
AUX
)
Extension Cable
(Sold separately)
Microphone
8
Touch Start to start auto EQ.
9
When the 10-second countdown starts,
get out of the car and close the door within
10 seconds.
A measurement tone (noise) is emitted from
the speakers, and auto EQ measurement be-
gins.
When auto EQ is completed,
The measure-
ment has finished. Please disconnect the
microphone and then push HOME key.
is
displayed.
When the car
’
s interior acoustic characteris-
tics cannot be measured correctly, an error
message will be displayed. (Refer to
Under-
standing auto EQ error messages
on page 80.)
#
It takes about nine minutes for auto EQ mea-
surement to be completed when all the speakers
are connected.
#
To stop auto EQ, touch
Stop
.
10 Store the microphone carefully in the
glove compartment or another safe place.
If the microphone is subjected to direct sun-
light for an extended period, high tempera-
tures may cause distortion, color change or
malfunction.
Selecting the video format
You can switch the video output format of
V
OUT
between NTSC and PAL.
1
Press the home button to switch to the
home display.
2
Touch the system key to open the sys-
tem menu.
3
Touch Video Output Format on the sys-
tem menu to select the video output for-
mat.
NTSC
—
PAL
Note
You can switch the video output format only for
the source from this unit.
Setting the video signal
When you connect this unit to an AV equip-
ment to this unit, select the suitable video sig-
nal setting.
!
As this function is initially set to
Auto
, the
unit will automatically adjust the video sig-
nal setting.
!
You can operate this function only for the
video signal input into the AV input.
En
66
Section
18
System settings
Summary of Contents for AVH-X12500BT
Page 95: ...En 95 ...