AVH-P6300BT/XNUC
98
1
2
3
4
1
2
3
4
C
D
F
A
B
E
Fig. 2
Fig. 1
Connector
(pickup flexible part)
Short circuit
-
How to remove the PU unit
1. Set the mechanism to the locking position (disc load standby position).
2. Set the ceiling surface of the mechanism module downward.
3. Short-circuit two parts of lands of the pickup flexible part. (Fig. 1)
4. Remove the connector of the pickup flexible part. (Fig. 2)
(The flexible part is damaged if the board is removed without removing the flexible part, so be sure to remove it.)
1. Unscrew two screws and remove the CRG motor ASS'Y.
Fig. 3
Locking screw (CRG)
Locking screw (CRG)
CRG motor ASS’Y