![Pioneer AVH-P6300BT/XNUC Service Manual Download Page 81](http://html.mh-extra.com/html/pioneer/avh-p6300bt-xnuc/avh-p6300bt-xnuc_service-manual_331402081.webp)
AVH-P6300BT/XNUC
81
5
6
7
8
5
6
7
8
C
D
F
A
B
E
[Coordinate inspection]
[Outline]
The coordinate before correction and after correction at the time of pressing the touch panel are displayed for
coordinate verification.
Furthermore, the red "+" cursor can be moved by the key operaiont mentioned bellow, and the coordinate of
the cursor center is displayed.
[Display specifications]
Fixed display
[Operation specification]
Operational description
Remote controller key
Return to top menu
1
Each displayed coordinate is as follows.
The values under [Factory] are the corrected values in the Factory region and the values under [User] are
the corrected values in the User region.
• Sampling
: A/D value (X direction, Y direction) of the pressed point is displayed.
• AD Value
: The coordinate (X direction, Y direction) of the A/D value of the pressed point corrected by
the reference value for A/D correction is displayed.
• Normalization
: The coordinate (X direction, Y direction) after normalizing the A/D corrected coordinate
within the effective range is displayed. (0~255)
• Calibration
: The coordinate (X direction, Y direction) which is the result of adding the correction
by calibration to the normalized coordinate is displayed.
16 calibration points "+" are displayed in white.