AVH-P6300BT/XNUC
72
1
2
3
4
1
2
3
4
C
D
F
A
B
E
2 Select
3 Select
4 Select
Select
Select
Select DVD
Select
Select CD
5 Select
Return
5 Select
Return
5 Select
Return
5 Select
Return
5 Select
Select
5 Select
Return
1 Select
Select
5 Select
Return
LD ON
completed
Acquire
ASMAX
value
Acquire RF
level value
Select
Select
Select
Display ASMAX
value
Display RF level
value
(Updated at intervals
of approx. 500 msecs)
Select
Acquire error
ratio
Search
destination ID
0x00100000
Search destination ID
Inner : 0x00040000
Outer : 0x00200000
Middle : 0x00100000
Search destination
CRG home position
*1: Display the selected position
Inner DVD: Inner
Outer DVD: Outer
Middle DVD: Middle
CD:
CD
Select
Display error ratio
CRG Move
completed
<In case of an error>
<In case of an error in Power_OFF>
Select
CRG transfers to
the outermost
circumference
<Screen transition>
Simplified FE test mode
Numbers on each screen can be selected with the “test key commands”.
No display data for the test mode is notified in the simplified FE test mode.
[Notes]
The simplified FE test mode checks the status transition and the test results only with the mecha OSD. Therefore, the following actions need to be taken in the HOST:
• Output the mecha image output to the front monitor. To locate the operating buttons on the screen, combine the screen display and button operation.
• In case of the product with the rear monitor output, output the image of the simplified test mode.
For these actions, consult with the service department.
