Pioneer AVH-P4900D Operation Manual Download

Page: 61 / 85

AUX (auxiliary input) and AV (AV input) are set
to the same source level adjustment volume
automatically.

Using the dynamic range control

The dynamic range refers to the difference be-
tween the largest and softest sounds. The dy-
namic range control compresses this
difference so that you can clearly hear sounds
even at low volume levels.

The dynamic range control is effective only
on Dolby Digital sounds.

When playing other than the DVD disc, you
cannot switch to

D.R.C

Touch D.R.C on the DSP function menu.

When playing other than the DVD disc, you

cannot switch this mode.

Touch

to turn the dynamic range con-

trol on.

To turn dynamic range control off, touch

Using the down-mix function

The down-mix function allows you to play back
multi-channel audio in 2 channels.

Touch DOWN MIX on the DSP function

menu.

Touch

to select the desired level.

Touch

to select

Lo/Ro

. Touch

to select

Lt/Rt

Lo/Ro

–

Stereo mix the original audio that

do not contain channel modes such as sur-
round components.

Lt/Rt

–

Down mix so that the surround

components can be restored (decoded).

Using the direct control

You can override audio settings to check for ef-
fectiveness of your audio settings.

All audio functions are locked out when the
direct control is on except

VOLUME

Touch DIGITL DIRECT on the DSP func-

tion menu.

Touch

to turn the direct control on.

To turn direct control off, touch

Using the Dolby Pro Logic II

Dolby Pro Logic II creates five full-bandwidth
output channels from two-channel sources to
achieve high-purity matrix surround.

Dolby Pro Logic II supports up to 48kHz
sampling rate stereo source and has no ef-
fect on other types of source.

Touch NEXT on the DSP function menu.

Touch DOLBY PL II.

Touch any of the following touch panel

keys to select the desired mode.

MOVIE

–

The Movie mode suitable for

movie playback

MUSIC

–

The Music mode suitable for

music playback

MATRIX

–

The Matrix mode for when FM

radio reception is weak

OFF

–

Turn Dolby Pro Logic II off

ADJUST

–

Adjust the Music mode

You can operate

ADJUST

only when

MUSIC

has been selected.

Adjusting the Music mode

You can adjust the Music mode with the fol-
lowing three controls.

Available accessories

Section

vailable

accessories

Summary of Contents for AVH-P4900D






















































































Search results

Summary of Contents for AVH-P4900D

Reviews:

Related manuals for AVH-P4900D

Brands by name

Popular brands

Pioneer AVH-P4900D, Operation Manual

Search results

Summary of Contents for AVH-P4900D

Reviews:

Related manuals for AVH-P4900D

Brands by name

Popular brands