1
Touch SETUP and VISUAL and then
touch PARENTAL.
2
Touch 0 to 9 to input the registered
code number.
3
Touch ENTER.
This enters the code number, and you can now
change the level.
#
If you input an incorrect code number, the
icon
is displayed. Touch
C
and input the cor-
rect code number.
#
If you forget your code number, refer to
If you
forget your code number
on this page.
4
Touch any of 1 to 8 to select the desired
level.
The new parental lock level is set.
If you forget your code number
Refer to
Changing the level
on the previous
page, and touch
C
10 times. The registered
code number is canceled, letting you register
a new one.
Initial Settings
Adjusting initial settings
Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1
1
Function display
Shows the function names.
1
Touch the source icon and then touch
OFF to turn this unit off.
#
When the source icon is not displayed, you
can display it by touching the screen.
2
Press A.MENU button and touch INIT to
display the initial function names.
The function names are displayed and oper-
able ones are highlighted.
#
To go to the next group of function names,
touch
NEXT
.
#
To return to the previous group of function
names, touch
PREV
.
#
When the multi-channel processor (e.g., DEQ-
P8000) is connected to this unit, you can operate
D. ATT
and
RESET
instead of
REARSP
.
#
To return to the previous display, touch
BACK
.
#
To return to the display of each source, touch
ESC
.
Operating this unit
En
38
Section
03
