2
Touch
c
to turn rear view camera set-
ting on.
#
To turn rear view camera setting off, touch
d
.
3
Touch
b
and then touch
c
or
d
to se-
lect an appropriate setting for polarity.
Each time you touch
c
or
d
it switches be-
tween the following polarity:
!
BATTERY
–
When the polarity of the con-
nected lead is positive while the gear shift
is in
REVERSE (R)
position
!
GND
–
When the polarity of the connected
lead is negative while the gear shift is in
REVERSE (R)
position
Setting the automatic open
function
To prevent the display from hitting the shift
lever of an automatic vehicle when it is in
P
(park) position, or when you do not wish the
display to open/close automatically, you can
set the automatic open function in the manual
mode.
Furthermore, to adjust the LCD panel slide po-
sition, you can turn the set back on or off.
1
Touch FLP ST on the setup menu.
2
Touch
a
to turn the set back on and the
LCD panel slides to the back.
#
Touch
b
to turn the set back off and the LCD
panel slides to the front.
3
Touch
c
or
d
to select the display to
open/close automatically or manually.
Touch
c
to select
MANUAL
, and you have to
press
OPEN/CLOSE
to open/close the display.
Touch
d
to select
AUTO
, and the display auto-
matically opens/closes when power to this
unit is turned on.
Setting the clock
Use these instructions to set the clock.
1
Touch CLOCK ADJUST on the setup
menu.
2
Touch OFF to turn the clock display on.
ON
will appear in the display instead of
OFF
.
Clock display is now on.
#
To turn the clock display off, touch
ON
.
3
Touch
c
or
d
to select the segment of
the clock display you wish to set.
Each time you touch
c
or
d
it will select one
segment of the clock display:
Hour
—
Minute
As you select segments of the clock display
the segment selected will be highlighted.
4
Touch
a
or
b
to set the clock.
Each time you touch
a
it increases the se-
lected hour or minute. Each time you touch
b
it decreases the selected hour or minute.
Notes
!
You can match the clock to a time signal by
touching
JUST
.
—
If the minute is
00
to
29
, the minutes are
rounded down. (e.g.,
10:18
becomes
10:00
.)
—
If the minute is
30
to
59
, the minutes are
rounded up. (e.g.,
10:36
becomes
11:00
.)
!
Even when the sources are off, the clock dis-
play appears on the display.
Operating this unit
En
42
Section
03
