AVD-W9000/UR
5
5
6
7
8
5
6
7
8
C
D
F
A
B
E
1. SERVICE PRECAUTIONS
1.1 SERVICE PRECAUTIONS
1.2 NOTES ON SOLDERING
1) You should conform to the regulations governing the product (safety, radio and noise, and other regulations),
and should keep the safety during servicing by following the safety instructions described in this manual.
2) Be careful in handling ICs. Some ICs such as MOS type are so fragile that they can be damaged by electrostatic
induction.
3) Before disassembling the unit, be sure to turn off the power. Unplugging and plugging the connectors
during power-on mode may damage the ICs inside the unit.
4) During disassembly, be sure to turn the power off since an internal IC might be destroyed when a connector
is plugged or unplugged.
5) Because the screen of the LCD is not covered in the touch panel, don't touch the screen directly.
6) Following parts on the Video PCB can not be supplied.
l
o
b
m
y
S
t
i
u
c
r
i
C
n
o
i
t
p
i
r
c
s
e
D
Buzzer
BZ9001
Electrolytic Capacitor
C103, C104, C106, C107, C108, C109, C111, C112, C113, C115, C154, C155, C156, C157, C265,
C268, C269, C274, C335, C337, C341, C342, C352, C357, C810, C811
Connector
CN201, CN801, CN9001, CN9002, CN9003
Filter
EF201, EF202, EF203
Filter
F212, F213, F214, F215, F216
2
0
0
9
C
I
C
I
, IC9004
Inductor
L301, L309, L801, L802, L803
Resistor Array
LM201, LM202, LM203, LM204, LM205, LM206
Resistor
R219, R220, R221, R222, R223, R227, R818
Resistor Array
RM201, RM202, RM203, RM204, RM205, RM206
Oscillator
X201
For environmental protection, lead-free solder is used on the printed circuit boards mounted in this unit.
Be sure to use lead-free solder and a soldering iron that can meet specifications for use with lead-free solders for repairs
accompanied by reworking of soldering.
Compared with conventional eutectic solders, lead-free solders have higher melting points, by approximately 40 C.
Therefore, for lead-free soldering, the tip temperature of a soldering iron must be set to around 373 C in general, although
the temperature depends on the heat capacity of the PC board on which reworking is required and the weight of the tip of
the soldering iron.
Compared with eutectic solders, lead-free solders have higher bond strengths but slower wetting times and higher melting
temperatures (hard to melt/easy to harden).
The following lead-free solders are available as service parts:
Parts numbers of lead-free solder:
GYP1006 1.0 in dia.
GYP1007 0.6 in dia.
GYP1008 0.3 in dia.
Summary of Contents for AVD-W9000
