08
Customising preferences
Chapter
39
Engb
Customising preferences
2 Tap [Rear Speaker].
Tapping [
Rear Speaker
] changes the settings
as follows:
Full
(default)
When no subwoofer is connected to the
rear output, select “
Full
”.
Subwoofer
When a subwoofer is connected to the
rear output, select “
Subwoofer
”.
❐
Even if you change this setting, there will be
no output unless you turn the subwoofer
output on.
➲
For details, refer to
Using the subwoofer
output
on page 37.
❐
If you change this setting, subwoofer output
in the audio menu will return to the factory
settings.
Setting the RCA output
This product’s preout (RCA rear output or sub-
woofer output) can be used for a full-range
speaker (
Full
) or subwoofer (
Subwoofer
) con-
nection.
Initially, the product is set for a rear full-range
speaker connection (
Full
).
❐
“
Preout
” can be set only when the source is
set to “
OFF
”.
1 Display the “System” screen.
➲
For details, refer to
Customising the system
settings
on the previous page.
2 Tap [Preout].
Tapping [
Preout
] changes the settings as fol-
lows:
Subwoofer
(default)
When a subwoofer is connected to the
RCA rear output, select “
Subwoofer
”.
Full
When no subwoofer is connected to the
RCA rear output, select “
Full
”.
❐
Even if you change this setting, there will be
no output unless you turn the subwoofer
output on.
➲
For details, refer to
Using the subwoofer
output
on page 37.
•
•
•
•
❐
If you change this setting, subwoofer out-
put in the audio menu will return to the fac-
tory settings.
Setting the FM tuning step
Normally the FM tuning step employed by
seek tuning is 50 kHz. When “
AF
” (Alternative
Frequencies) or “
TA
” (Traffic Announcements)
is on, the tuning step automatically changes to
100 kHz. But you can set the tuning step to
50 kHz when “
AF
” or “
TA
” is on.
Initially, this function is set to “
100 kHz
”.
❐
“
FM Step
” can be set only when the source
is set to “
OFF
”.
1 Display the “System” screen.
➲
For details, refer to
Customising the system
settings
on the previous page.
2 Tap [FM Step].
Each time you tap [
FM Step
] will switch the
FM tuning step between “
50 kHz
” and
“
100 kHz
” while “
AF
” or “
TA
” is on.
❐
The tuning step remains at “
50 kHz
” during
manual tuning.
RDS setting
Limiting stations to regional programming
When “
Alternative FREQ
” is used, the re-
gional function limits the selection of stations
to those broadcasting regional programmes.
❐
This function is effective only when the
radio source is set to FM tuner.
1 Display the “System” screen.
➲
For details, refer to
Customising the system
settings
on the previous page.
