Pioneer APP Radio 3, Operation Manual

Page: 68 / 166

Customizing preferences
14
Chapter
68
En
• Color : Adjusts the color saturation.
• Hue : Adjusts the tone of color (red or
green is emphasized).
• Dimmer : Adjusts the brightness of the
display.
• Temperature : Adjusts the color temper-
ature, resulting in a better white balance.
❐
You can adjust “ Hue ” only when “ Video
Signal Setting ” is set to “ NTSC ”.
❐
With some rear view cameras, picture ad-
justment may not be possible.
6 Tap or to adjust the selected item.
Each time you tap or
,
the level of the se-
lected item increases or decreases.
■
If you want to switch the adjustment item,
tap or .
❐
“ Brightness ”, “ Contrast ”, “ Color ”, “ Hue ”
can be adjusted from “ +24 ” to “ –24 ”.
❐
“ Dimmer ” can be adjusted from “ +1 ” to
“ +48 ”.
❐
“ Temperature ” can be adjusted from “ +3 ”
to “ –3 ”.
❐
You cannot operate this function while driv-
ing.
❐
Different “ Brightness ”, “ Contrast ”,
“ Dimmer ” settings can be set for when the
illumination switch is on and when it is off.
❐
The same specifications are applied to all
sources (Home screen, Settings screen,
Radio, iPod music, Pandora) other than the
video source.
❐
The “ Dimmer ” setting is set to a common
setting in all sources.
Setting the clock mode
You can change the time format.
1 Display the “System” screen.
Ü
For details, refer to Customizing the
system settings on page 63.
2 Tap [Clock Mode].
Tapping [ Clock Mode ] changes the settings
as follows:
• 12H (default) :
Changes the display to 12-hour format.
• 24H :
Changes the display to 24-hour format.
Selecting the background display
You can change the audio source screen
background and Home screen background.
1 Display the “System” screen.
Ü
For details, refer to Customizing the
system settings on page 63.
2 Tap [Background].
The background screen appears.
3 Tap the desired background display.
Restoring the default settings
Resets various settings registered to this prod-
uct and restores them to the default settings.
❐
“
System Reset
” can be set only when
the source is set to “
OFF
”.
1 Display the “System” screen.
Ü
For details, refer to Customizing the
system settings on page 63.