Pioneer APP Radio 3, Operation Manual

Page: 27 / 166

07
Viewing/operating mobile device applications
Chapter
27
En
V
iewing/operating mobile device applications
Using Apps/MirrorLink
source
This product provides the AppRadio Mode ,
the MirrorLink mode, and the App Mode for
viewing and operating the mobile device ap-
plications that are installed in the mobile de-
vice connected.
Available modes change according to the
connected device.
WARNING
Certain uses of a mobile device may not be le-
gal while driving in your jurisdiction, so you
must be aware of and obey any such restric-
tions.
If in doubt as to a particular function, only
perform it while the car is parked. No feature
should be used unless it is safe to do so un-
der the driving conditions you are experienc-
ing.
• Pioneer is not liable for any issues that
may arise from incorrect or flawed app-
based content.
• The content and functionality of the sup-
ported applications are the responsibility
of the App providers.
• In the AppRadio Mode , functionality
through the product is limited while driv-
ing, with available functions determined
by the App providers.
• Availability of the AppRadio Mode func-
tionality is determined by the App provid-
er, and not determined by Pioneer.
• The AppRadio Mode allows access to
applications other than those listed (sub-
ject to limitations while driving), but the
extent to which content can be used is
determined by the App providers.
AppRadio Mode
When you connect a mobile device with the
AppRadio Mode compatible applications
(such as AppRadio app) installed, you can
control applications for the mobile device di-
rectly on this product (
AppRadio Mode ).
You can view and operate the compatible ap-
plications via the display with multi-touch ges-
tures like tapping, dragging, scrolling, and
flicking.
AppRadio Mode for iPhone
You can automatically start the AppRadio
Mode when the “ App launch assist ” setting
is set to “ On ” (default).
The procedure changes depending on the
type of your iPhone to be connected.
Ü
For details of the App launch assist setting,
refer to Switching the App launch assist
function (for iPhone) on page 69.
1 Unlock your device and then connect
your iPhone to this product.
Ü
For details, refer to Connecting and discon-
necting mobile devices on page 10.
❐
When an iPhone with 30-pin connector is
connected, the application startup mes-
sage appears and the AppRadio app
launches, then the Application menu
screen appears. Follow the procedure on
step 4.
❐
When an iPhone with Lightning connector
is connected, follow the next procedure.
2 Press the Home button to display the
Home screen.