Pioneer ANH-P9R, Installation Manual

Page: 8 / 160

Power cable connection
Connecting the Units
En 8
Connect leads of the
same color to each other. C a p ( 1 * )
When not using this terminal,
do not remove the cap.
Fuse holder
Yellow (2*)
To terminal always supplied
with power regardless of
ignition switch position.
Red (4*)
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
Yellow (3*)
Back-up
(or accessory)
Red (5*)
Accessory
(or back-up)
Black (ground)
To vehicle (metal) body.
Orange/white
To lighting switch terminal.
Fuse resistor
Fuse resistor
Note
Depending on the kind of vehicle, the function of 3* and 5*
may be different. In this case, be sure to connect 2* to 5*
and 4* to 3*.
Speaker leads
White
White/black
Gray
Gray/black
Green
Green/black
Violet
Violet/black
: Front left +
: Front left ≠
: Front right +
: Front right ≠
: Rear left + or Subwoofer +
: Rear left ≠ or Subwoofer ≠
: Rear right + or Subwoofer +
: Rear right ≠ or Subwoofer ≠
1*
2*
4*
3*
5*
This Product
Antenna jack
IP-BUS input (Blue)
GPS aerial jack
RCA outputs
(Refer to page 10.)