Pioneer ANH-P9R, Installation Manual

Page: 15 / 160

Installation
En 15
English
Espa
ñ
ol
Deutsch
Fran
ç
ais
Italiano
Nederlands
Installation with the rubber bush
Fig. 7
Removing the unit
Fig. 8
Fig. 9
Frame
Pull out to remove the frame.
(When reattaching the frame, point
the side with a groove downwards
and attach it.)
Holder
After inserting the holder into the dash-
board, then select the appropriate tabs
according to the thickness of the dash-
board material and bend them.
(Install as firmly as possible using the top
and bottom tabs. To secure, bend the tabs
90 degrees.)
182
53
Rubber bush
Screw
Dashboard
Insert the supplied
extraction keys into the
unit, as shown in the
figure, until they click
into place. Keeping the
keys pressed against
the sides of the unit,
pull the unit out.