Initial Settings menu
08
61
En
Chapter 8
Initial Settings menu
Using the Initial Settings
menu
The Initial Settings menu gives you complete
control in setting up your DVD player,
including audio, and video output settings,
audience limitation settings, among others.
If an option is grayed out it means that it
cannot be changed at the current time. This is
usually because a disc is playing. Stop the
disc, then change the setting.
1
Press HOME MENU and select ‘Initial
Settings’ from the on-screen display.
2
Select the setup category from the list
on the left, then select an item from the
menu list to the right.
3
Make the setting you want.
• The language options shown in the on-
screen display illustrations on the
following pages may not correspond to
those available in your country or region.
Digital Audio Out settings
• None of the Digital Audio Out settings
affect the audio output from the i.LINK
interface. For i.LINK settings, see
i.LINK
Setup
on page 77.
Digital Out
• Default setting:
On
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one of the digital
outputs.
If at any time you need to switch off the digital
audio output, set this to Off, otherwise leave it
On.
• You can’t switch on/off the optical and
coaxial outputs individually.
• There is no digital output when playing
SACDs and some DVD-Audio discs
regardless of this setting.
Audio Settings
Play Mode
Setup Navigator
Disc Navigator
Video Adjust
Initial Settings
HOME MENU
DVD
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
Digital Out
Dolby Digital Out
DTS Out
Linear PCM Out
MPEG Out
On
Off
Initial Settings
DV-79AVi.book Page 61 Tuesday, August 2, 2005 4:48 PM
