background image

Caution! Danger

It is absolutely forbidden to vacuum inflammable and/or toxic liquids and powders.

Caution! Danger

It is dangerous and absolutely forbidden to touch the lower part of the machine with the hands when any
parts are moving. Should it be absolutely necessary, remove the key from the dashboard.

Instructions for use

Only an authorized operator can use the machine.  To prevent the machine from being used by unauthorized
personnel, it is important to remove the ignition key when not in operation.  When the machine is not working,
it should be protected from any accidental movements by pressing the emergency push button or detaching
the plug from the battery.  While the machine is working, pay attention to strangers and in particular to 
children.  

Caution! 

Always keep the Operator’s Manual at the work place of the machine.  Beyond the use and maintenance
instructions, observe and follow the binding general legislative rules regarding Accident Prevention and
Environment Protection.  This can also concern the handling of harmful materials, the availability and
mounting of customized protection equipment and compliance with the rules of the road.  In case of machine
modifications, which can compromise its safety or its operation, stop the machine immediately and inform the
responsible body or person.  Do not make any change or variation to the machine that can compromise its
safety, without prior written authorization by Amano Pioneer Eclipse.  

Never perform any unsafe operations. Before starting to work, become familiar with the environment of the
working place.  The working environment includes, for instance, any potential obstacles present in the
working and transition area and knowledge of the ground capacity in a public traffic area.  

Comply with the instructions contained in the Operator’s Manual regarding “on” and “off” operation.  Before
starting the machine, check that the operation does not endanger anyone.  Transportation of people and
things is not allowed.

Caution!

Keep in mind the following standards.  Failure to adhere to these rules can endanger the life of the operator
or of other people.  Always keep sufficient distance from sidewalk edges and from large differences in the
height of the floor where the machine can fall. Never adopt a work technique that can compromise the
stability of the machine.  

When on a slope, keep the machine directed in an uphill or downhill direction.  Never travel across a slope
with one side of the machine higher than the other.  When going downhill, always adjust the speed to
environmental conditions.  Do not turn the machine at excessive speeds, particularly if the floor is not flat.

Caution! Danger

Never operate the machine when stopped for special operations (setting up, maintenance, etc.). Before
starting the machine, check for any possible visible defects on the safety devices, and check the correct
operation of the emergency stop push button or of the equivalent mechanism.  Never operate the machine
when the control panel indicates defective tools, warning lights, etc.

5

Summary of Contents for CleanStar CS 2000



























Reviews: