10
Part names
Rear panel
1.
ON/OFF switch
Turns the unit on and off.
2.
Signal GND terminal
Connect a turntable’s ground wire.
Reduces unwanted noises that occur when a turntable is connected to the unit.
3.
Kensington security slot
Connect a cable lock.
4.
USB port (for power supply)
Connect to a USB power adapter (sold separately) via a USB cable.
•
Use a USB power adapter output of 5 V / 500 mA or higher (less than 100 W).
•
You can use your PC/Mac’s USB port to power the unit.
•
This port can be used for power supply only. If you connect a PC/Mac to this port,
only power is supplied.
5.
USB port (for connecting a PC/Mac)
Connect a PC/Mac. This port can be used for power supply and for controlling Serato DJ
Pro.
6.
MASTER1 terminals (balanced XLR)
Connect to analog input terminals on a power amplifier, etc.
6
7
9
9
10
1
2
3
4
8
8
11
5
