12
PC/Mac setup
To input or output your PC/Mac’s audio to/from the unit, install the dedicated audio driver
software and/or Setting Utility on your computer.
The PC (Windows) software contains both the dedicated audio driver software and the
Setting Utility.
The Mac software contains the Setting Utility only.
•
For information on the latest system requirements, compatibility, and supported operating
systems, visit the URL below.
•
Operation isn’t guaranteed on all PC/Mac models, even if the system requirements are
met.
•
Operation isn’t guaranteed when multiple units are connected to a PC/Mac.
•
If a PC (Windows) without the dedicated audio driver software installed is connected to the
unit, errors may occur on the PC.
•
Malfunctions may occur due to incompatibility with other software installed on a PC/Mac.
Installation
Notes on installation
•
Turn the unit off and disconnect the USB cable connected to the unit and the PC/Mac
before installation.
•
Close all applications running on the PC/Mac before installation.
•
You’ll need admin rights to install the dedicated software to your PC/Mac.
•
Read the License Agreement terms carefully before installation.
•
If you quit the installation halfway through, perform the installation procedure from the
beginning again.
•
After the installation is complete, connect the PC/Mac to the unit.
•
Operation isn’t guaranteed on all PC/Mac models.
