En
15
Additional
information
Additional information
Troubleshooting
!
If you think that there is something wrong with this unit, check the following items, and also access [
FAQ & DJ software support information
] on
the Pioneer DJ support site and check [
FAQ
] for [
DJM-TOUR1
].
http://pioneerdj.com/support/
Sometimes the problem may lie in another component. Inspect the other components and electrical appliances being used. If the problem cannot
be rectified, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.
!
This unit may not operate properly due to static electricity or other external influences. In such cases, normal operation may be restored by unplug-
ging the power cord then plugging it back in.
Problem
Check
Remedy
The power is not turned on.
Is the power cord properly connected?
Plug in the power cord to an AC outlet.
No sound or small sound.
Is the input selector switch set to the proper
position?
Switch the input selector switch to switch the channel’s input source.
(page 14 )
Are the connection cables properly connected?
Connect the connection cables properly. (page 12 )
Are the terminals and plugs dirty?
Clean the terminals and plugs before making connections.
Distorted sound.
Is the sound level output from the [
MASTER
]
channel appropriately set?
Adjust the [
MASTER LEVEL
] control so that the master channel level indicator
lights at around [
0 dB
] at the peak level. (page 14 )
Is the level of audio input to each channel properly
set?
Adjust the [
TRIM
] control so that the channel level indicator lights at about
[
0 dB
] at the peak level. (page 14 )
Can’t crossfade.
Are the [
CROSS FADER ASSIGN
(
A
,
THRU
,
B
)]
selector switches properly set?
Set the [
CROSS FADER ASSIGN
(
A
,
THRU
,
B
)] selector switches for the different
channels properly. (page 14 )
Sound is distorted when an ana-
log player is connected to this
unit’s [
PHONO
] terminals.
Or, lighting of the channel level
indicator does not change even when
the [
TRIM
] control is turned.
Have you connected an analog player with a built-
in phono equalizer?
Connect the analog player with built-in phono equalizer to the [
LINE
] terminals.
(page 12 )
If the analog player with built-in phono equalizer has a PHONO/LINE selector
switch, switch it to PHONO.
Is an audio interface for computers connected
between the analog player and this unit?
If the output of the audio interface for computers is line level, connect it to the
[
LINE
] terminals. (page 12 )
If the analog player has a PHONO/LINE selector switch, switch it to PHONO.
Changing the settings
!
For details on how to change the settings of this unit, see “Changing
the settings” in the Operating Instructions.
About trademarks and registered
trademarks
!
"Pioneer DJ" is a trademark of PIONEER CORPORATION, and is used
under license.
The names of companies and products mentioned herein are trade-
marks or registered trademarks of their respective owners.
Cautions on copyrights
Recordings you have made are for your personal enjoyment and accord-
ing to copyright laws may not be used without the consent of the copy-
right holder.
!
Music recorded from CDs, etc., is protected by the copyright laws of
individual countries and by international treaties. It is the full respon-
sibility of the person who has recorded the music to ensure that it is
used legally.
!
When handling music downloaded from the Internet, etc., it is the
full responsibility of the person who has downloaded the music to
ensure that it is used in accordance with the contract concluded
with the download site.
Summary of Contents for DJM-TOUR1
Page 17: ...17 En Additional information...
Page 18: ...18 En...
