43
Audio output
2.
REVERSE switch
Turns the crossfader reverse function on and off.
3.
CURVE knob
Sets the crossfader curve.
—
: Gradually raises the volume of the sound assigned to the other side as the
crossfader is moved from one side (CH 1 or CH 2 side) to the other, and
decreases the volume of the sound on the side it is moving away from.
—
: Steeply raises the volume of the sound assigned to the other side as the
crossfader is moved from one side (CH 1 or CH 2 side) to the other.
Setting the crossfader
1 Turn the [CURVE] knob to set the crossfader curve.
2 Turn the [FEELING ADJUST] knob to adjust the “weight” of
the crossfader.
•
Set the [
REVERSE
] switch to [
ON
] to reverse the operating direction of the crossfader.
•
You can set the cut lag (the range where sound is not output at both sides of the
crossfader) in [
CROSSFADER CUT LAG
] in the Utility settings (page 105).
