PIONEER DJ DDJ-RZX, Operating Instructions Manual

Page: 13 / 116

En
13
English
Playing tracks and outputting the sound
The following describes the procedure for outputting the channel 1
sound as an example.
!
Set the volume of the devices (power amplifier, powered speakers,
etc.) connected to the [ MASTER 1 ] and [ MASTER 2 ] terminals to an
appropriate level. Note that loud sound will be output if the volume is
set too high.
BPM DOWN BPM UP
d
4
8
7
5
6
9
a
b
c
e
f
4 CD, USB selector switch
5
TRIM control
6
ISO/EQ (HI, MID, LOW) controls
7 Headphones CUE button
8 Channel fader
9
HEADPHONES MIXING control
a
HEADPHONES LEVEL control
b Crossfader assign selector switch
c Crossfader
d
MASTER LEVEL control
e
MASTER CUE button
f BOOTH MONITOR control
1 Set the positions of the controls, etc., as shown
below.
Names of controls, etc. Position
MASTER LEVEL control Turned fully counterclockwise
CD, USB
selector switch [
USB
] position
TRIM control Turned fully counterclockwise
ISO/EQ ( HI , MID , LOW ) controls Center
Channel fader Moved forward
Crossfader assign selector switch [
THRU
] position
2 Press the [PLAY/PAUSE
f
] button to play the track.
BPM DOWN BPM UP
3 Turn the [TRIM] control.
Adjust the [ TRIM ] control so that the channel level indicator’s orange
indicator lights at peak level.
4 Move the channel fader away from you.
5 Turn the [MASTER LEVEL] control to adjust the audio
level of the speakers.
Adjust the sound level output from the [ MASTER 1 ] and [ MASTER 2 ]
terminals to an appropriate level.
Monitoring sound with headphones
Set the positions of the controls, etc., as shown below.
Names of controls, etc. Position
HEADPHONES MIXING
control Center
HEADPHONES LEVEL control Turned fully counterclockwise
1 Press the headphones [CUE] button for the channel 1.
2 Turn the [HEADPHONES LEVEL] control.
Adjust the sound level output from the headphones to an appropriate
level.
Note
This unit and rekordbox dj include many functions to allow for more
individualistic DJ performances. For details on each function, see the
rekordbox software’s manual.
! The rekordbox software’s manual can be downloaded from rekord-
box.com. For details, see Viewing the Operating Instructions of rekord-
box (p. 4 ).
Quitting the system
1 Quit rekordbox.
2 Press the [
u
] switch on this unit’s rear panel to set
this unit’s power to standby.
3 Disconnect the USB cable from your computer.