39
Please note: After attaching both roof
panels to walls as shown above, drill
the holes through with a 3mm drill bit
for the roof brace and fit it to the ridge
beam and front wall as shown.
Repeat the same step for the roof side.
Then repeat this procedure for the rear
wall roof brace.
96
L4
L4
L4
L4
L4
G8
S31
Once 4 wall are fixed together, position the roof and fix 2 x part 96 (roof brace) to help support the pitch of the roof as per the diagram
below. Join the roof panels to the gable using part L4 (lip) and then fix the 4 corners using 16mm self-tapping screws.
Note:
Do not fix
central screws marked with a cross at this stage).
Summary of Contents for Cyclonic Kit 3.0m Gable Series
Page 45: ...45...
